[Openvas-commits] r5691 - in trunk/openvas-libraries: . tools
scm-commit@wald.intevation.org
scm-commit at wald.intevation.org
Fri Oct 23 21:14:19 CEST 2009
Author: mattm
Date: 2009-10-23 21:14:19 +0200 (Fri, 23 Oct 2009)
New Revision: 5691
Added:
trunk/openvas-libraries/tools/
trunk/openvas-libraries/tools/openvas-lsc-rpm-creator.sh
Modified:
trunk/openvas-libraries/ChangeLog
trunk/openvas-libraries/MANIFEST
trunk/openvas-libraries/Makefile
Log:
* tools: New directory.
* tools/openvas-lsc-rpm-creator.sh: New file.
* Makefile (install-tools): New rule.
(install): Depend on install-tools.
(clean, distclean): Format like others.
* MANIFEST: Add new dir and file.
Modified: trunk/openvas-libraries/ChangeLog
===================================================================
--- trunk/openvas-libraries/ChangeLog 2009-10-23 19:11:12 UTC (rev 5690)
+++ trunk/openvas-libraries/ChangeLog 2009-10-23 19:14:19 UTC (rev 5691)
@@ -1,3 +1,15 @@
+2009-10-23 Matthew Mundell <matthew.mundell at intevation.de>
+
+ * tools: New directory.
+
+ * tools/openvas-lsc-rpm-creator.sh: New file.
+
+ * Makefile (install-tools): New rule.
+ (install): Depend on install-tools.
+ (clean, distclean): Format like others.
+
+ * MANIFEST: Add new dir and file.
+
2009-10-22 Matthew Mundell <matthew.mundell at intevation.de>
* base/pidfile.c (pidfile_create, pidfile_remove): Add NULL end args.
Modified: trunk/openvas-libraries/MANIFEST
===================================================================
--- trunk/openvas-libraries/MANIFEST 2009-10-23 19:11:12 UTC (rev 5690)
+++ trunk/openvas-libraries/MANIFEST 2009-10-23 19:14:19 UTC (rev 5691)
@@ -213,4 +213,6 @@
openvas-libraries.tmpl.in
README
TODO
+tools/
+tools/openvas-lsc-rpm-creator.sh
VERSION
Modified: trunk/openvas-libraries/Makefile
===================================================================
--- trunk/openvas-libraries/Makefile 2009-10-23 19:11:12 UTC (rev 5690)
+++ trunk/openvas-libraries/Makefile 2009-10-23 19:14:19 UTC (rev 5691)
@@ -40,7 +40,11 @@
$(SHELL) configure $(CONFIGURE_ARGS)
touch $@
-install : all
+install-tools:
+ test -d $(DESTDIR)${datarootdir}/openvas || $(INSTALL_DIR) -m 755 $(DESTDIR)${datarootdir}/openvas
+ $(INSTALL) -m 755 tools/openvas-lsc-rpm-creator.sh $(DESTDIR)${datarootdir}/openvas
+
+install: all install-tools
test -d $(DESTDIR)${prefix} || ${INSTALL_DIR} -m 755 $(DESTDIR)${prefix}
test -d $(DESTDIR)${includedir}/openvas || ${INSTALL_DIR} -m 755 $(DESTDIR)${includedir}/openvas
test -d $(DESTDIR)${includedir}/openvas/base || ${INSTALL_DIR} -m 755 $(DESTDIR)${includedir}/openvas/base
@@ -104,7 +108,7 @@
@echo ' --------------------------------------------------------------'
@echo
-clean :
+clean:
-cd base && ${MAKE} clean
-cd hg && ${MAKE} clean
-cd misc && ${MAKE} clean
@@ -112,7 +116,7 @@
-cd omp && ${MAKE} clean
rm -rf doc/generated
-distclean : clean
+distclean: clean
rm -f ${rootdir}/include/config.h libtool config.cache \
config.status config.log ${rootdir}/include/libvers.h
-cd misc && ${MAKE} distclean
Added: trunk/openvas-libraries/tools/openvas-lsc-rpm-creator.sh
===================================================================
--- trunk/openvas-libraries/tools/openvas-lsc-rpm-creator.sh 2009-10-23 19:11:12 UTC (rev 5690)
+++ trunk/openvas-libraries/tools/openvas-lsc-rpm-creator.sh 2009-10-23 19:14:19 UTC (rev 5691)
@@ -0,0 +1,4162 @@
+#!/bin/sh
+# This script was generated using Makeself 2.1.5
+
+CRCsum="1984712875"
+MD5="0c92d32bff3ba1bac00bfa2b0a58e472"
+TMPROOT=${TMPDIR:=/tmp}
+
+label="OpenVAS ssh client RPM creator"
+script="./create-rpm.sh"
+scriptargs=""
+targetdir="blubber"
+filesizes="163840"
+keep=y
+
+print_cmd_arg=""
+if type printf > /dev/null; then
+ print_cmd="printf"
+elif test -x /usr/ucb/echo; then
+ print_cmd="/usr/ucb/echo"
+else
+ print_cmd="echo"
+fi
+
+unset CDPATH
+
+MS_Printf()
+{
+ $print_cmd $print_cmd_arg "$1"
+}
+
+MS_Progress()
+{
+ while read a; do
+ MS_Printf .
+ done
+}
+
+MS_diskspace()
+{
+ (
+ if test -d /usr/xpg4/bin; then
+ PATH=/usr/xpg4/bin:$PATH
+ fi
+ df -kP "$1" | tail -1 | awk '{print $4}'
+ )
+}
+
+MS_dd()
+{
+ blocks=`expr $3 / 1024`
+ bytes=`expr $3 % 1024`
+ dd if="$1" ibs=$2 skip=1 obs=1024 conv=sync 2> /dev/null | \
+ { test $blocks -gt 0 && dd ibs=1024 obs=1024 count=$blocks ; \
+ test $bytes -gt 0 && dd ibs=1 obs=1024 count=$bytes ; } 2> /dev/null
+}
+
+MS_Help()
+{
+ cat << EOH >&2
+Makeself version 2.1.5
+ 1) Getting help or info about $0 :
+ $0 --help Print this message
+ $0 --info Print embedded info : title, default target directory, embedded script ...
+ $0 --lsm Print embedded lsm entry (or no LSM)
+ $0 --list Print the list of files in the archive
+ $0 --check Checks integrity of the archive
+
+ 2) Running $0 :
+ $0 [options] [--] [additional arguments to embedded script]
+ with following options (in that order)
+ --confirm Ask before running embedded script
+ --noexec Do not run embedded script
+ --keep Do not erase target directory after running
+ the embedded script
+ --nox11 Do not spawn an xterm
+ --nochown Do not give the extracted files to the current user
+ --target NewDirectory Extract in NewDirectory
+ --tar arg1 [arg2 ...] Access the contents of the archive through the tar command
+ -- Following arguments will be passed to the embedded script
+EOH
+}
+
+MS_Check()
+{
+ OLD_PATH="$PATH"
+ PATH=${GUESS_MD5_PATH:-"$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"}
+ MD5_ARG=""
+ MD5_PATH=`exec <&- 2>&-; which md5sum || type md5sum`
+ test -x "$MD5_PATH" || MD5_PATH=`exec <&- 2>&-; which md5 || type md5`
+ test -x "$MD5_PATH" || MD5_PATH=`exec <&- 2>&-; which digest || type digest`
+ PATH="$OLD_PATH"
+
+ MS_Printf "Verifying archive integrity..."
+ offset=`head -n 404 "$1" | wc -c | tr -d " "`
+ verb=$2
+ i=1
+ for s in $filesizes
+ do
+ crc=`echo $CRCsum | cut -d" " -f$i`
+ if test -x "$MD5_PATH"; then
+ if test `basename $MD5_PATH` = digest; then
+ MD5_ARG="-a md5"
+ fi
+ md5=`echo $MD5 | cut -d" " -f$i`
+ if test $md5 = "00000000000000000000000000000000"; then
+ test x$verb = xy && echo " $1 does not contain an embedded MD5 checksum." >&2
+ else
+ md5sum=`MS_dd "$1" $offset $s | eval "$MD5_PATH $MD5_ARG" | cut -b-32`;
+ if test "$md5sum" != "$md5"; then
+ echo "Error in MD5 checksums: $md5sum is different from $md5" >&2
+ exit 2
+ else
+ test x$verb = xy && MS_Printf " MD5 checksums are OK." >&2
+ fi
+ crc="0000000000"; verb=n
+ fi
+ fi
+ if test $crc = "0000000000"; then
+ test x$verb = xy && echo " $1 does not contain a CRC checksum." >&2
+ else
+ sum1=`MS_dd "$1" $offset $s | CMD_ENV=xpg4 cksum | awk '{print $1}'`
+ if test "$sum1" = "$crc"; then
+ test x$verb = xy && MS_Printf " CRC checksums are OK." >&2
+ else
+ echo "Error in checksums: $sum1 is different from $crc"
+ exit 2;
+ fi
+ fi
+ i=`expr $i + 1`
+ offset=`expr $offset + $s`
+ done
+ echo " All good."
+}
+
+UnTAR()
+{
+ tar $1vf - 2>&1 || { echo Extraction failed. > /dev/tty; kill -15 $$; }
+}
+
+finish=true
+xterm_loop=
+nox11=y
+copy=none
+ownership=y
+verbose=n
+
+initargs="$@"
+
+while true
+do
+ case "$1" in
+ -h | --help)
+ MS_Help
+ exit 0
+ ;;
+ --info)
+ echo Identification: "$label"
+ echo Target directory: "$targetdir"
+ echo Uncompressed size: 159 KB
+ echo Compression: none
+ echo Date of packaging: Fri Oct 2 11:36:56 BST 2009
+ echo Built with Makeself version 2.1.5 on linux-gnu
+ echo Build command was: "./makeself-2.1.5/makeself.sh \\
+ \"--nox11\" \\
+ \"--notemp\" \\
+ \"--nocomp\" \\
+ \"/tmp/blubber\" \\
+ \"openvas-ssh-client-rpm-creator.sh\" \\
+ \"OpenVAS ssh client RPM creator\" \\
+ \"./create-rpm.sh\""
+ if test x$script != x; then
+ echo Script run after extraction:
+ echo " " $script $scriptargs
+ fi
+ if test x"" = xcopy; then
+ echo "Archive will copy itself to a temporary location"
+ fi
+ if test x"y" = xy; then
+ echo "directory $targetdir is permanent"
+ else
+ echo "$targetdir will be removed after extraction"
+ fi
+ exit 0
+ ;;
+ --dumpconf)
+ echo LABEL=\"$label\"
+ echo SCRIPT=\"$script\"
+ echo SCRIPTARGS=\"$scriptargs\"
+ echo archdirname=\"blubber\"
+ echo KEEP=y
+ echo COMPRESS=none
+ echo filesizes=\"$filesizes\"
+ echo CRCsum=\"$CRCsum\"
+ echo MD5sum=\"$MD5\"
+ echo OLDUSIZE=159
+ echo OLDSKIP=405
+ exit 0
+ ;;
+ --lsm)
+cat << EOLSM
+No LSM.
+EOLSM
+ exit 0
+ ;;
+ --list)
+ echo Target directory: $targetdir
+ offset=`head -n 404 "$0" | wc -c | tr -d " "`
+ for s in $filesizes
+ do
+ MS_dd "$0" $offset $s | eval "cat" | UnTAR t
+ offset=`expr $offset + $s`
+ done
+ exit 0
+ ;;
+ --tar)
+ offset=`head -n 404 "$0" | wc -c | tr -d " "`
+ arg1="$2"
+ shift 2
+ for s in $filesizes
+ do
+ MS_dd "$0" $offset $s | eval "cat" | tar "$arg1" - $*
+ offset=`expr $offset + $s`
+ done
+ exit 0
+ ;;
+ --check)
+ MS_Check "$0" y
+ exit 0
+ ;;
+ --confirm)
+ verbose=y
+ shift
+ ;;
+ --noexec)
+ script=""
+ shift
+ ;;
+ --keep)
+ keep=y
+ shift
+ ;;
+ --target)
+ keep=y
+ targetdir=${2:-.}
+ shift 2
+ ;;
+ --nox11)
+ nox11=y
+ shift
+ ;;
+ --nochown)
+ ownership=n
+ shift
+ ;;
+ --xwin)
+ finish="echo Press Return to close this window...; read junk"
+ xterm_loop=1
+ shift
+ ;;
+ --phase2)
+ copy=phase2
+ shift
+ ;;
+ --)
+ shift
+ break ;;
+ -*)
+ echo Unrecognized flag : "$1" >&2
+ MS_Help
+ exit 1
+ ;;
+ *)
+ break ;;
+ esac
+done
+
+case "$copy" in
+copy)
+ tmpdir=$TMPROOT/makeself.$RANDOM.`date +"%y%m%d%H%M%S"`.$$
+ mkdir "$tmpdir" || {
+ echo "Could not create temporary directory $tmpdir" >&2
+ exit 1
+ }
+ SCRIPT_COPY="$tmpdir/makeself"
+ echo "Copying to a temporary location..." >&2
+ cp "$0" "$SCRIPT_COPY"
+ chmod +x "$SCRIPT_COPY"
+ cd "$TMPROOT"
+ exec "$SCRIPT_COPY" --phase2 -- $initargs
+ ;;
+phase2)
+ finish="$finish ; rm -rf `dirname $0`"
+ ;;
+esac
+
+if test "$nox11" = "n"; then
+ if tty -s; then # Do we have a terminal?
+ :
+ else
+ if test x"$DISPLAY" != x -a x"$xterm_loop" = x; then # No, but do we have X?
+ if xset q > /dev/null 2>&1; then # Check for valid DISPLAY variable
+ GUESS_XTERMS="xterm rxvt dtterm eterm Eterm kvt konsole aterm"
+ for a in $GUESS_XTERMS; do
+ if type $a >/dev/null 2>&1; then
+ XTERM=$a
+ break
+ fi
+ done
+ chmod a+x $0 || echo Please add execution rights on $0
+ if test `echo "$0" | cut -c1` = "/"; then # Spawn a terminal!
+ exec $XTERM -title "$label" -e "$0" --xwin "$initargs"
+ else
+ exec $XTERM -title "$label" -e "./$0" --xwin "$initargs"
+ fi
+ fi
+ fi
+ fi
+fi
+
+if test "$targetdir" = "."; then
+ tmpdir="."
+else
+ if test "$keep" = y; then
+ echo "Creating directory $targetdir" >&2
+ tmpdir="$targetdir"
+ dashp="-p"
+ else
+ tmpdir="$TMPROOT/selfgz$$$RANDOM"
+ dashp=""
+ fi
+ mkdir $dashp $tmpdir || {
+ echo 'Cannot create target directory' $tmpdir >&2
+ echo 'You should try option --target OtherDirectory' >&2
+ eval $finish
+ exit 1
+ }
+fi
+
+location="`pwd`"
+if test x$SETUP_NOCHECK != x1; then
+ MS_Check "$0"
+fi
+offset=`head -n 404 "$0" | wc -c | tr -d " "`
+
+if test x"$verbose" = xy; then
+ MS_Printf "About to extract 159 KB in $tmpdir ... Proceed ? [Y/n] "
+ read yn
+ if test x"$yn" = xn; then
+ eval $finish; exit 1
+ fi
+fi
+
+MS_Printf "Uncompressing $label"
+res=3
+if test "$keep" = n; then
+ trap 'echo Signal caught, cleaning up >&2; cd $TMPROOT; /bin/rm -rf $tmpdir; eval $finish; exit 15' 1 2 3 15
+fi
+
+leftspace=`MS_diskspace $tmpdir`
+if test $leftspace -lt 159; then
+ echo
+ echo "Not enough space left in "`dirname $tmpdir`" ($leftspace KB) to decompress $0 (159 KB)" >&2
+ if test "$keep" = n; then
+ echo "Consider setting TMPDIR to a directory with more free space."
+ fi
+ eval $finish; exit 1
+fi
+
+for s in $filesizes
+do
+ if MS_dd "$0" $offset $s | eval "cat" | ( cd "$tmpdir"; UnTAR x ) | MS_Progress; then
+ if test x"$ownership" = xy; then
+ (PATH=/usr/xpg4/bin:$PATH; cd "$tmpdir"; chown -R `id -u` .; chgrp -R `id -g` .)
+ fi
+ else
+ echo
+ echo "Unable to decompress $0" >&2
+ eval $finish; exit 1
+ fi
+ offset=`expr $offset + $s`
+done
+echo
+
+cd "$tmpdir"
+res=0
+if test x"$script" != x; then
+ if test x"$verbose" = xy; then
+ MS_Printf "OK to execute: $script $scriptargs $* ? [Y/n] "
+ read yn
+ if test x"$yn" = x -o x"$yn" = xy -o x"$yn" = xY; then
+ eval $script $scriptargs $*; res=$?;
+ fi
+ else
+ eval $script $scriptargs $*; res=$?
+ fi
+ if test $res -ne 0; then
+ test x"$verbose" = xy && echo "The program '$script' returned an error code ($res)" >&2
+ fi
+fi
+if test "$keep" = n; then
+ cd $TMPROOT
+ /bin/rm -rf $tmpdir
+fi
+eval $finish; exit $res
+./ 0000777 0001750 0001750 00000000000 11261353710 010244 5 ustar mattm mattm ./TODO 0000666 0001750 0001750 00000001620 11261350671 010736 0 ustar mattm mattm TODO:
+
+- The temporary directory name "blubber" should be replaced by a
+ random dynamic name, similar to the "mktemp" command.
+
+- rpmbuild insists to use "./configure". It would be good
+ to change this to eliminate then the dummy "configure" script.
+
+- To be able to include the resulting shellscript into a spec file, it
+ might be necessary to modify it, to not disturb the spec parser of
+ rpmbuild. There are two possibilities: sourcing it, or using a (not
+ very neat) "ASCII blob", which will not interfere with the syntax
+ necessities of spec files. Perl has uuencoding built in, without
+ any module dependencies (see "perldoc -f pack").
+ So the ASCII blob could be de/encoded by piping it through Perl.
+
+ - Fail installation process if user exists already (useradd returns 9),
+ because when package is removed, the users home directory will be deleted.
+
+ - Set expire-date for user (configurable). ./README 0000666 0001750 0001750 00000002761 11261350671 011135 0 ustar mattm mattm openvas-lsc-target-preparation
+------------------------------
+
+To prepare a shell script that can be used to create RPMs
+that make target systems ready for OpenVAS Local Security Checks (LSCs),
+follow these instructions. The resulting shell script
+could be used e.g. by OpenVAS-Client's key manager.
+
+ make self
+
+The resulting shell script can be used like this:
+
+ sh openvas-ssh-client-rpm-creator.sh --target /abs/path/to/temp/working/dir /absolute/path/to/id_rsa_pubkey.pub
+
+After successfull execution, a resulting rpm package will be placed in the
+directory provided with --target.
+Be sure to clean up the provided directory afterwards!
+Ommitting the --target argument might work. Then, contents are extracted into a
+'blubber' directory. It is generally suggested to provide the directory and
+remove it afterwards yourself.
+
+To test the functionality inside this directory, please execute ( with
+the name "John Doe" as an example)
+
+ sh create-rpm.sh id_rsa_johndoe.pub
+
+to create an RPM to install on target machines using this specific
+public key as secure access requirement via ssh.
+
+For further development:
+
+If you want to include more files or directories into this shellscript
+build system, do before
+
+ make distclean
+
+then add the files, and do a
+
+ make manifest
+
+The version number resides in the file "VERSION".
+
+BUGS:
+ The system is likely to fail, if its parent directory or included
+ files contain spaces in filenames, or other characters which need
+ to be quoted for being used well in a UNIX shell.
+ ./PUBKEYNAME 0000666 0001750 0001750 00000000000 11261353710 011615 0 ustar mattm mattm ./lsc-pubkey.pub 0000666 0001750 0001750 00000000000 11261353710 013020 0 ustar mattm mattm ./configure 0000777 0001750 0001750 00000000060 11261350671 012152 0 ustar mattm mattm #!/bin/sh
+echo "This is just a dummy, see TODO"
+ ./MANIFEST 0000666 0001750 0001750 00000000235 11261353151 011374 0 ustar mattm mattm Changelog
+MANIFEST
+Makefile
+NAME
+PUBKEYNAME
+README
+RPMBASENAME
+TODO
+VERSION
+configure
+create-rpm.sh
+lsc-pubkey.pub
+makeself-2.1.5
+openvas-lsc-target.spec.in
+ ./create-rpm.sh 0000777 0001750 0001750 00000004211 11261350671 012643 0 ustar mattm mattm #!/bin/sh
+
+# OpenVAS module "openvas-lsc-target-preparation", create-rpm.sh
+# $Id$
+# Description: shellscript to create a rpm package
+#
+# Authors:
+# Jochen Plumeyer <jochen at plumeyer.de>
+# Jan-Oliver Wagner <jan-oliver.wagner at intevation.de>
+#
+# Copyright:
+# Copyright (C) 2009 Intevation GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2,
+# as published by the Free Software Foundation
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+
+#set -x
+
+# We expect to be called like
+# ./create-rpm.sh MyPathToKeyFile.pub
+
+PubkeyFile=
+
+if [ $# = 1 ];
+then
+ PubkeyFile=$1
+else
+ echo 'Please provide path to public key file as first argument.'
+ exit 1
+fi
+
+mkdir -p rpmtmp
+
+cp -f $PubkeyFile lsc-pubkey.pub
+RpmPrefix="openvas-lsc-target"
+BasenamePubkeyFile=`basename $PubkeyFile .pub`
+RpmPostfix=`echo $BasenamePubkeyFile | sed 's/id_rsa_//'`
+Version=`cat VERSION`
+TopDir=`pwd`
+echo $RpmPostfix > PUBKEYNAME
+RpmName=$RpmPrefix-$RpmPostfix
+sed "s|@RpmName@|$RpmName|g" < openvas-lsc-target.spec.in > openvas-lsc-target.spec
+sed -i "s|@PubkeyBasename@|$RpmPostfix|g" openvas-lsc-target.spec
+sed -i "s|@VERSION@|$Version|g" openvas-lsc-target.spec
+sed -i "s|@TOPDIR@|$TopDir|g" openvas-lsc-target.spec
+
+ # ... install $PubkeyFile as a file which installs temporarily as
+ # target-user-visible $PubkeyRPMPayload on the target machine
+
+make configure
+
+RPM_SOURCE_DIR=. rpmbuild -bb --target noarch "$RpmPrefix".spec
+
+# Script code for client machine is in %post of openvas-lsc-target.spec.in
+
+# We do not clean up. If its required ('blubber'), use:
+# cp RPMS/noarch/*.rpm ..
+# pwd=`pwd`
+# if [ `basename $pwd` = "blubber" ]
+# then
+# rm -rf `pwd`
+
+cp RPMS/noarch/*.rpm .
+
+
+#vim: set tw=70
+ ./Makefile 0000666 0001750 0001750 00000004252 11261353070 011706 0 ustar mattm mattm VERSION=$(shell cat VERSION)
+NAME=$(shell cat NAME)
+RPMBASENAME=$(shell cat RPMBASENAME)
+PUBKEYNAME=$(shell cat PUBKEYNAME)
+RPMNAME=$(RPMBASENAME)-$(PUBKEYNAME)
+FILES=$(shell xargs < MANIFEST)
+#PACKDIR=$(shell mktemp -d /tmp/thisgoesawayXXXXX )
+PACKDIR=/tmp/blubber
+EXECUTE_DIR=$(shell basename $(PACKDIR))
+
+default:
+ # NOP, no operation
+
+# Creating the fundamental directories and contents for the RPM
+# building, not using the system defaults
+configure: rpmdist
+ mkdir SOURCES
+ mkdir RPMS
+ mkdir BUILD
+ mv $(RPMNAME)-$(VERSION).tar.gz SOURCES/
+
+install:
+ cp lsc-pubkey.pub $(RPM_BUILD_ROOT)/home/$(PUBKEYNAME)/.ssh/authorized_keys
+
+clean:
+ LC_ALL=C ls | egrep -v "\.spec" | diff MANIFEST - | grep "^>" | sed 's/^..//' | xargs rm -rf
+
+# The default pubkey is used as an example, to test the building
+# system locally. An RPM should be generated.
+test:
+ cp ~/.ssh/id_rsa.pub id_rsa_sshovas.pub
+ sh create-rpm.sh id_rsa_sshovas.pub
+
+# "make rpmdist" Packing this same system with the changed name into RPM SOURCES
+# directory
+rpmdist: clean
+ echo $(FILES)
+ mkdir $(RPMNAME)-$(VERSION)
+ cp -ar $(FILES) $(RPMNAME)-$(VERSION)/
+ tar cfzv $(RPMNAME)-$(VERSION).tar.gz $(RPMNAME)-$(VERSION)
+ rm -rf $(RPMNAME)-$(VERSION)
+
+# "make dist": Everything, even the *.spec file is cleaned up
+dist: distclean
+ echo $(FILES)
+ mkdir $(NAME)-$(VERSION)
+ cp -ar $(FILES) $(NAME)-$(VERSION)/
+ tar cfzv $(NAME)-$(VERSION).tar.gz $(NAME)-$(VERSION)
+ rm -rf $(NAME)-$(VERSION)
+
+# "make self" generates the all-containing shellscript.
+# This is the script to be used on the RPM building machines:
+# <shellscript.sh> </absolute/path/to/pubkey.pub>
+self: distclean
+ rm -rf $(PACKDIR)
+ mkdir $(PACKDIR)
+ cp -ar $(FILES) $(PACKDIR)/
+ ./makeself-2.1.5/makeself.sh --nox11 --notemp --nocomp $(PACKDIR) openvas-ssh-client-rpm-creator.sh "OpenVAS ssh client RPM creator" ./create-rpm.sh
+ rm -rf $(PACKDIR)
+
+# If you plan to add files or directories to this system, please do
+# "make distclean", add the files and then
+# "make manifest". So everything should go straight.
+manifest:
+ ls > MANIFEST
+
+#
+distclean: clean
+ rm -f PUBKEYNAME *.spec lsc-pubkey.pub
+ touch PUBKEYNAME lsc-pubkey.pub
+
+.PHONY: clean default install test distclean manifest
+ ./openvas-lsc-target.spec.in 0000666 0001750 0001750 00000003461 11261350671 015252 0 ustar mattm mattm %define name @RpmName@
+%define PubkeyBasename @PubkeyBasename@
+%define version @VERSION@
+%define release 1
+%define _topdir @TOPDIR@
+%define _tmppath @TOPDIR@/rpmtmp
+%define manifest %{_builddir}/%{name}-%{version}-%{release}.manifest
+
+# required items
+Name: %{name}
+Version: %{version}
+Release: %{release}
+License: GPL
+Group: Application/Misc
+
+Source: %{name}-%{version}.tar.gz
+#Prefix: /usr
+BuildRoot: /var/tmp/%{name}-%{version}
+
+Summary: OpenVAS local security check preparation
+
+%description
+This package prepares a system for OpenVAS local security checks.
+A user is created with a specific SSH authorized key.
+The corresponding private key is located at the respective
+OpenVAS installation.
+
+%prep
+%setup -q
+#%patch0 -p1
+
+%build
+make
+
+%install
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT/home/%{PubkeyBasename}/.ssh/
+%makeinstall
+
+# __os_install_post is implicitly expanded after the
+# %install section... do it now, and then disable it,
+# so all work is done before building manifest.
+
+%{?__os_install_post}
+%define __os_install_post %{nil}
+
+# build the file list automagically into %{manifest}
+
+cd $RPM_BUILD_ROOT
+rm -f %{manifest}
+find . -type d \
+ | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' >> %{manifest}
+find . -type f \
+ | sed 's,^\.,\%attr(-\,root\,root) ,' >> %{manifest}
+find . -type l \
+ | sed 's,^\.,\%attr(-\,root\,root) ,' >> %{manifest}
+
+%pre
+useradd -c "OpenVAS Local Security Checks" -d /home/%{PubkeyBasename} -m -s /bin/bash %{PubkeyBasename}
+
+%post
+chown -R %{PubkeyBasename} /home/%{PubkeyBasename}/.ssh
+chmod 500 /home/%{PubkeyBasename}/.ssh
+chmod 400 /home/%{PubkeyBasename}/.ssh/authorized_keys
+
+
+#%preun
+%postun
+userdel -f %{PubkeyBasename}
+
+%clean
+rm -f %{manifest}
+rm -rf $RPM_BUILD_ROOT
+
+%files -f %{manifest}
+%defattr(-,root,root)
+#%doc README
+#%docdir
+#%config
+
+%changelog
+ ./NAME 0000666 0001750 0001750 00000000037 11261350671 010712 0 ustar mattm mattm openvas-lsc-target-preparation
+ ./makeself-2.1.5/ 0000777 0001750 0001750 00000000000 11261350671 012477 5 ustar mattm mattm ./makeself-2.1.5/TODO 0000666 0001750 0001750 00000000321 11261350671 013163 0 ustar mattm mattm What needs to be done next :
+
+- Generic compression code (thru a user-defined command)
+- Collect names of directories potentially containing md5 program. GUESS_MD5_PATH
+
+Stéphane Peter <megastep at megastep.org>
+ ./makeself-2.1.5/makeself.sh 0000777 0001750 0001750 00000027223 11261350671 014633 0 ustar mattm mattm #!/bin/sh
+#
+# Makeself version 2.1.x
+# by Stephane Peter <megastep at megastep.org>
+#
+# $Id: makeself.sh,v 1.64 2008/01/04 23:52:14 megastep Exp $
+#
+# Utility to create self-extracting tar.gz archives.
+# The resulting archive is a file holding the tar.gz archive with
+# a small Shell script stub that uncompresses the archive to a temporary
+# directory and then executes a given script from withing that directory.
+#
+# Makeself home page: http://www.megastep.org/makeself/
+#
+# Version 2.0 is a rewrite of version 1.0 to make the code easier to read and maintain.
+#
+# Version history :
+# - 1.0 : Initial public release
+# - 1.1 : The archive can be passed parameters that will be passed on to
+# the embedded script, thanks to John C. Quillan
+# - 1.2 : Package distribution, bzip2 compression, more command line options,
+# support for non-temporary archives. Ideas thanks to Francois Petitjean
+# - 1.3 : More patches from Bjarni R. Einarsson and Francois Petitjean:
+# Support for no compression (--nocomp), script is no longer mandatory,
+# automatic launch in an xterm, optional verbose output, and -target
+# archive option to indicate where to extract the files.
+# - 1.4 : Improved UNIX compatibility (Francois Petitjean)
+# Automatic integrity checking, support of LSM files (Francois Petitjean)
+# - 1.5 : Many bugfixes. Optionally disable xterm spawning.
+# - 1.5.1 : More bugfixes, added archive options -list and -check.
+# - 1.5.2 : Cosmetic changes to inform the user of what's going on with big
+# archives (Quake III demo)
+# - 1.5.3 : Check for validity of the DISPLAY variable before launching an xterm.
+# More verbosity in xterms and check for embedded command's return value.
+# Bugfix for Debian 2.0 systems that have a different "print" command.
+# - 1.5.4 : Many bugfixes. Print out a message if the extraction failed.
+# - 1.5.5 : More bugfixes. Added support for SETUP_NOCHECK environment variable to
+# bypass checksum verification of archives.
+# - 1.6.0 : Compute MD5 checksums with the md5sum command (patch from Ryan Gordon)
+# - 2.0 : Brand new rewrite, cleaner architecture, separated header and UNIX ports.
+# - 2.0.1 : Added --copy
+# - 2.1.0 : Allow multiple tarballs to be stored in one archive, and incremental updates.
+# Added --nochown for archives
+# Stopped doing redundant checksums when not necesary
+# - 2.1.1 : Work around insane behavior from certain Linux distros with no 'uncompress' command
+# Cleaned up the code to handle error codes from compress. Simplified the extraction code.
+# - 2.1.2 : Some bug fixes. Use head -n to avoid problems.
+# - 2.1.3 : Bug fixes with command line when spawning terminals.
+# Added --tar for archives, allowing to give arbitrary arguments to tar on the contents of the archive.
+# Added --noexec to prevent execution of embedded scripts.
+# Added --nomd5 and --nocrc to avoid creating checksums in archives.
+# Added command used to create the archive in --info output.
+# Run the embedded script through eval.
+# - 2.1.4 : Fixed --info output.
+# Generate random directory name when extracting files to . to avoid problems. (Jason Trent)
+# Better handling of errors with wrong permissions for the directory containing the files. (Jason Trent)
+# Avoid some race conditions (Ludwig Nussel)
+# Unset the $CDPATH variable to avoid problems if it is set. (Debian)
+# Better handling of dot files in the archive directory.
+# - 2.1.5 : Made the md5sum detection consistent with the header code.
+# Check for the presence of the archive directory
+# Added --encrypt for symmetric encryption through gpg (Eric Windisch)
+# Added support for the digest command on Solaris 10 for MD5 checksums
+# Check for available disk space before extracting to the target directory (Andreas Schweitzer)
+# Allow extraction to run asynchronously (patch by Peter Hatch)
+# Use file descriptors internally to avoid error messages (patch by Kay Tiong Khoo)
+#
+# (C) 1998-2008 by Stéphane Peter <megastep at megastep.org>
+#
+# This software is released under the terms of the GNU GPL version 2 and above
+# Please read the license at http://www.gnu.org/copyleft/gpl.html
+#
+
+MS_VERSION=2.1.5
+MS_COMMAND="$0"
+unset CDPATH
+
+for f in "${1+"$@"}"; do
+ MS_COMMAND="$MS_COMMAND \\\\
+ \\\"$f\\\""
+done
+
+# Procedures
+
+MS_Usage()
+{
+ echo "Usage: $0 [params] archive_dir file_name label [startup_script] [args]"
+ echo "params can be one or more of the following :"
+ echo " --version | -v : Print out Makeself version number and exit"
+ echo " --help | -h : Print out this help message"
+ echo " --gzip : Compress using gzip (default if detected)"
+ echo " --bzip2 : Compress using bzip2 instead of gzip"
+ echo " --compress : Compress using the UNIX 'compress' command"
+ echo " --nocomp : Do not compress the data"
+ echo " --notemp : The archive will create archive_dir in the"
+ echo " current directory and uncompress in ./archive_dir"
+ echo " --copy : Upon extraction, the archive will first copy itself to"
+ echo " a temporary directory"
+ echo " --append : Append more files to an existing Makeself archive"
+ echo " The label and startup scripts will then be ignored"
+ echo " --current : Files will be extracted to the current directory."
+ echo " Implies --notemp."
+ echo " --nomd5 : Don't calculate an MD5 for archive"
+ echo " --nocrc : Don't calculate a CRC for archive"
+ echo " --header file : Specify location of the header script"
+ echo " --follow : Follow the symlinks in the archive"
+ echo " --nox11 : Disable automatic spawn of a xterm"
+ echo " --nowait : Do not wait for user input after executing embedded"
+ echo " program from an xterm"
+ echo " --lsm file : LSM file describing the package"
+ echo
+ echo "Do not forget to give a fully qualified startup script name"
+ echo "(i.e. with a ./ prefix if inside the archive)."
+ exit 1
+}
+
+# Default settings
+if type gzip 2>&1 > /dev/null; then
+ COMPRESS=gzip
+else
+ COMPRESS=Unix
+fi
+KEEP=n
+CURRENT=n
+NOX11=n
+APPEND=n
+COPY=none
+TAR_ARGS=cvf
+HEADER=`dirname $0`/makeself-header.sh
+
+# LSM file stuff
+LSM_CMD="echo No LSM. >> \"\$archname\""
+
+while true
+do
+ case "$1" in
+ --version | -v)
+ echo Makeself version $MS_VERSION
+ exit 0
+ ;;
+ --bzip2)
+ COMPRESS=bzip2
+ shift
+ ;;
+ --gzip)
+ COMPRESS=gzip
+ shift
+ ;;
+ --compress)
+ COMPRESS=Unix
+ shift
+ ;;
+ --encrypt)
+ COMPRESS=gpg
+ shift
+ ;;
+ --nocomp)
+ COMPRESS=none
+ shift
+ ;;
+ --notemp)
+ KEEP=y
+ shift
+ ;;
+ --copy)
+ COPY=copy
+ shift
+ ;;
+ --current)
+ CURRENT=y
+ KEEP=y
+ shift
+ ;;
+ --header)
+ HEADER="$2"
+ shift 2
+ ;;
+ --follow)
+ TAR_ARGS=cvfh
+ shift
+ ;;
+ --nox11)
+ NOX11=y
+ shift
+ ;;
+ --nowait)
+ shift
+ ;;
+ --nomd5)
+ NOMD5=y
+ shift
+ ;;
+ --nocrc)
+ NOCRC=y
+ shift
+ ;;
+ --append)
+ APPEND=y
+ shift
+ ;;
+ --lsm)
+ LSM_CMD="cat \"$2\" >> \"\$archname\""
+ shift 2
+ ;;
+ -h | --help)
+ MS_Usage
+ ;;
+ -*)
+ echo Unrecognized flag : "$1"
+ MS_Usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+done
+
+if test $# -lt 1; then
+ MS_Usage
+else
+ if test -d "$1"; then
+ archdir="$1"
+ else
+ echo "Directory $1 does not exist."
+ exit 1
+ fi
+fi
+archname="$2"
+
+if test "$APPEND" = y; then
+ if test $# -lt 2; then
+ MS_Usage
+ fi
+
+ # Gather the info from the original archive
+ OLDENV=`sh "$archname" --dumpconf`
+ if test $? -ne 0; then
+ echo "Unable to update archive: $archname" >&2
+ exit 1
+ else
+ eval "$OLDENV"
+ fi
+else
+ if test "$KEEP" = n -a $# = 3; then
+ echo "ERROR: Making a temporary archive with no embedded command does not make sense!" >&2
+ echo
+ MS_Usage
+ fi
+ # We don't really want to create an absolute directory...
+ if test "$CURRENT" = y; then
+ archdirname="."
+ else
+ archdirname=`basename "$1"`
+ fi
+
+ if test $# -lt 3; then
+ MS_Usage
+ fi
+
+ LABEL="$3"
+ SCRIPT="$4"
+ test x$SCRIPT = x || shift 1
+ shift 3
+ SCRIPTARGS="$*"
+fi
+
+if test "$KEEP" = n -a "$CURRENT" = y; then
+ echo "ERROR: It is A VERY DANGEROUS IDEA to try to combine --notemp and --current." >&2
+ exit 1
+fi
+
+case $COMPRESS in
+gzip)
+ GZIP_CMD="gzip -c9"
+ GUNZIP_CMD="gzip -cd"
+ ;;
+bzip2)
+ GZIP_CMD="bzip2 -9"
+ GUNZIP_CMD="bzip2 -d"
+ ;;
+gpg)
+ GZIP_CMD="gpg -ac -z9"
+ GUNZIP_CMD="gpg -d"
+ ;;
+Unix)
+ GZIP_CMD="compress -cf"
+ GUNZIP_CMD="exec 2>&-; uncompress -c || test \\\$? -eq 2 || gzip -cd"
+ ;;
+none)
+ GZIP_CMD="cat"
+ GUNZIP_CMD="cat"
+ ;;
+esac
+
+tmpfile="${TMPDIR:=/tmp}/mkself$$"
+
+if test -f $HEADER; then
+ oldarchname="$archname"
+ archname="$tmpfile"
+ # Generate a fake header to count its lines
+ SKIP=0
+ . $HEADER
+ SKIP=`cat "$tmpfile" |wc -l`
+ # Get rid of any spaces
+ SKIP=`expr $SKIP`
+ rm -f "$tmpfile"
+ echo Header is $SKIP lines long >&2
+
+ archname="$oldarchname"
+else
+ echo "Unable to open header file: $HEADER" >&2
+ exit 1
+fi
+
+echo
+
+if test "$APPEND" = n; then
+ if test -f "$archname"; then
+ echo "WARNING: Overwriting existing file: $archname" >&2
+ fi
+fi
+
+USIZE=`du -ks $archdir | cut -f1`
+DATE=`LC_ALL=C date`
+
+if test "." = "$archdirname"; then
+ if test "$KEEP" = n; then
+ archdirname="makeself-$$-`date +%Y%m%d%H%M%S`"
+ fi
+fi
+
+test -d "$archdir" || { echo "Error: $archdir does not exist."; rm -f "$tmpfile"; exit 1; }
+echo About to compress $USIZE KB of data...
+echo Adding files to archive named \"$archname\"...
+exec 3<> "$tmpfile"
+(cd "$archdir" && ( tar $TAR_ARGS - . | eval "$GZIP_CMD" >&3 ) ) || { echo Aborting: Archive directory not found or temporary file: "$tmpfile" could not be created.; exec 3>&-; rm -f "$tmpfile"; exit 1; }
+exec 3>&- # try to close the archive
+
+fsize=`cat "$tmpfile" | wc -c | tr -d " "`
+
+# Compute the checksums
+
+md5sum=00000000000000000000000000000000
+crcsum=0000000000
+
+if test "$NOCRC" = y; then
+ echo "skipping crc at user request"
+else
+ crcsum=`cat "$tmpfile" | CMD_ENV=xpg4 cksum | sed -e 's/ /Z/' -e 's/ /Z/' | cut -dZ -f1`
+ echo "CRC: $crcsum"
+fi
+
+if test "$NOMD5" = y; then
+ echo "skipping md5sum at user request"
+else
+ # Try to locate a MD5 binary
+ OLD_PATH=$PATH
+ PATH=${GUESS_MD5_PATH:-"$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"}
+ MD5_ARG=""
+ MD5_PATH=`exec <&- 2>&-; which md5sum || type md5sum`
+ test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which md5 || type md5`
+ test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which digest || type digest`
+ PATH=$OLD_PATH
+ if test `basename $MD5_PATH` = digest; then
+ MD5_ARG="-a md5"
+ fi
+ if test -x "$MD5_PATH"; then
+ md5sum=`cat "$tmpfile" | eval "$MD5_PATH $MD5_ARG" | cut -b-32`;
+ echo "MD5: $md5sum"
+ else
+ echo "MD5: none, MD5 command not found"
+ fi
+fi
+
+if test "$APPEND" = y; then
+ mv "$archname" "$archname".bak || exit
+
+ # Prepare entry for new archive
+ filesizes="$filesizes $fsize"
+ CRCsum="$CRCsum $crcsum"
+ MD5sum="$MD5sum $md5sum"
+ USIZE=`expr $USIZE + $OLDUSIZE`
+ # Generate the header
+ . $HEADER
+ # Append the original data
+ tail -n +$OLDSKIP "$archname".bak >> "$archname"
+ # Append the new data
+ cat "$tmpfile" >> "$archname"
+
+ chmod +x "$archname"
+ rm -f "$archname".bak
+ echo Self-extractible archive \"$archname\" successfully updated.
+else
+ filesizes="$fsize"
+ CRCsum="$crcsum"
+ MD5sum="$md5sum"
+
+ # Generate the header
+ . $HEADER
+
+ # Append the compressed tar data after the stub
+ echo
+ cat "$tmpfile" >> "$archname"
+ chmod +x "$archname"
+ echo Self-extractible archive \"$archname\" successfully created.
+fi
+rm -f "$tmpfile"
+ ./makeself-2.1.5/README 0000666 0001750 0001750 00000040013 11261350671 013355 0 ustar mattm mattm The following was generated from http://www.megastep.org/makeself/
+-----------------------
+
+
+ #[1]Mobile/PDA
+
+ makeself - Make self-extractable archives on Unix
+
+ [2]makeself.sh is a small shell script that generates a self-extractable
+ tar.gz archive from a directory. The resulting file appears as a shell
+ script (many of those have a .run suffix), and can be launched as is. The
+ archive will then uncompress itself to a temporary directory and an optional
+ arbitrary command will be executed (for example an installation script).
+ This is pretty similar to archives generated with WinZip Self-Extractor in
+ the Windows world. Makeself archives also include checksums for integrity
+ self-validation (CRC and/or MD5 checksums).
+
+ The makeself.sh script itself is used only to create the archives from a
+ directory of files. The resultant archive is actually a compressed (using
+ gzip, bzip2, or compress) TAR archive, with a small shell script stub at the
+ beginning. This small stub performs all the steps of extracting the files,
+ running the embedded command, and removing the temporary files when it's all
+ over. All what the user has to do to install the software contained in such
+ an archive is to "run" the archive, i.e sh nice-software.run. I recommend
+ using the "run" (which was introduced by some Makeself archives released by
+ Loki Software) or "sh" suffix for such archives not to confuse the users,
+ since they know it's actually shell scripts (with quite a lot of binary data
+ attached to it though!).
+
+ I am trying to keep the code of this script as portable as possible, i.e
+ it's not relying on any bash-specific features and only calls commands that
+ are installed on any functioning UNIX-compatible system. This script as well
+ as the archives it generates should run on any Unix flavor, with any
+ compatible Bourne shell, provided of course that the compression programs
+ are available.
+
+ As of version 2.1, Makeself has been rewritten and tested on the following
+ platforms :
+ * Linux (all distributions)
+ * Sun Solaris (8 tested)
+ * HP-UX (tested on 11.0 and 11i on HPPA RISC)
+ * SCO OpenUnix and OpenServer
+ * IBM AIX 5.1L
+ * MacOS X (Darwin)
+ * SGI IRIX 6.5
+ * FreeBSD
+ * UnicOS / Cray
+
+ If you successfully run Makeself and/or archives created with it on another
+ system, then [3]let me know!
+
+ Examples of publicly available archives made using makeself are :
+ * Game patches and installers for [4]Id Software games like Quake 3 for
+ Linux or Return To Castle Wolfenstien ;
+ * All game patches released by [5]Loki Software for the Linux version of
+ popular games ;
+ * The [6]nVidia drivers for Linux
+ * The installer for the Linux version of [7]Google Earth
+ * The [8]Makeself distribution itself ;-)
+ * and countless others...
+
+ Important note for Apache users: By default, most Web servers will think
+ that Makeself archives are regular text files and thus they may show up as
+ text in a Web browser. The correct way to prevent this is to add a MIME type
+ for this file format, like so (in httpd.conf) :
+ AddType application/x-makeself .run
+
+ Important note for recent GNU/Linux distributions: Archives created with
+ Makeself prior to v2.1.2 were using an old syntax for the head and tail Unix
+ commands that is being progressively obsoleted in their GNU forms. Therefore
+ you may have problems uncompressing some of these archives. A workaround for
+ this is to set the environment variable $_POSIX2_VERSION to enable the old
+ syntax, i.e. :
+ export _POSIX2_VERSION=199209
+
+Usage
+
+ The syntax of makeself is the following:
+
+ makeself.sh [args] archive_dir file_name label startup_script [script_args]
+ * args are optional options for Makeself. The available ones are :
+ + --version : Prints the version number on stdout, then exits
+ immediately
+ + --gzip : Use gzip for compression (is the default on platforms on
+ which gzip is commonly available, like Linux)
+ + --bzip2 : Use bzip2 instead of gzip for better compression. The
+ bzip2 command must be available in the command path. I recommend
+ that you set the prefix to something like '.bz2.run' for the
+ archive, so that potential users know that they'll need bzip2 to
+ extract it.
+ + --compress : Use the UNIX "compress" command to compress the data.
+ This should be the default on all platforms that don't have gzip
+ available.
+ + --nocomp : Do not use any compression for the archive, which will
+ then be an uncompressed TAR.
+ + --notemp : The generated archive will not extract the files to a
+ temporary directory, but in a new directory created in the current
+ directory. This is better to distribute software packages that may
+ extract and compile by themselves (i.e. launch the compilation
+ through the embedded script).
+ + --current : Files will be extracted to the current directory,
+ instead of in a subdirectory. This option implies --notemp above.
+ + --follow : Follow the symbolic links inside of the archive
+ directory, i.e. store the files that are being pointed to instead
+ of the links themselves.
+ + --append (new in 2.1.x): Append data to an existing archive,
+ instead of creating a new one. In this mode, the settings from the
+ original archive are reused (compression type, label, embedded
+ script), and thus don't need to be specified again on the command
+ line.
+ + --header : Makeself 2.0 uses a separate file to store the header
+ stub, called "makeself-header.sh". By default, it is assumed that
+ it is stored in the same location as makeself.sh. This option can
+ be used to specify its actual location if it is stored someplace
+ else.
+ + --copy : Upon extraction, the archive will first extract itself to
+ a temporary directory. The main application of this is to allow
+ self-contained installers stored in a Makeself archive on a CD,
+ when the installer program will later need to unmount the CD and
+ allow a new one to be inserted. This prevents "Filesystem busy"
+ errors for installers that span multiple CDs.
+ + --nox11 : Disable the automatic spawning of a new terminal in X11.
+ + --nowait : When executed from a new X11 terminal, disable the user
+ prompt at the end of the script execution.
+ + --nomd5 and --nocrc : Disable the creation of a MD5 / CRC checksum
+ for the archive. This speeds up the extraction process if integrity
+ checking is not necessary.
+ + --lsm file : Provide and LSM file to makeself, that will be
+ embedded in the generated archive. LSM files are describing a
+ software package in a way that is easily parseable. The LSM entry
+ can then be later retrieved using the '-lsm' argument to the
+ archive. An exemple of a LSM file is provided with Makeself.
+ * archive_dir is the name of the directory that contains the files to be
+ archived
+ * file_name is the name of the archive to be created
+ * label is an arbitrary text string describing the package. It will be
+ displayed while extracting the files.
+ * startup_script is the command to be executed from within the directory
+ of extracted files. Thus, if you wish to execute a program contain in
+ this directory, you must prefix your command with "./". For example,
+ ./program will be fine. The script_args are additionnal arguments for
+ this command.
+
+ Here is an example, assuming the user has a package image stored in a
+ /home/joe/mysoft, and he wants to generate a self-extracting package named
+ mysoft.sh, which will launch the "setup" script initially stored in
+ /home/joe/mysoft :
+
+ makeself.sh /home/joe/mysoft mysoft.sh "Joe's Nice Software Package" ./setup
+ Here is also how I created the [9]makeself.run archive which contains the
+ Makeself distribution :
+
+ makeself.sh --notemp makeself makeself.run "Makeself by Stephane Peter" echo
+ "Makeself has extracted itself"
+
+ Archives generated with Makeself 2.1 can be passed the following arguments:
+
+ * --keep : Prevent the files to be extracted in a temporary directory that
+ will be removed after the embedded script's execution. The files will
+ then be extracted in the current working directory and will stay here
+ until you remove them.
+ * --verbose : Will prompt the user before executing the embedded command
+ * --target dir : Allows to extract the archive in an arbitrary place.
+ * --nox11 : Do not spawn a X11 terminal.
+ * --confirm : Prompt the user for confirmation before running the embedded
+ command.
+ * --info : Print out general information about the archive (does not
+ extract).
+ * --lsm : Print out the LSM entry, if it is present.
+ * --list : List the files in the archive.
+ * --check : Check the archive for integrity using the embedded checksums.
+ Does not extract the archive.
+ * --nochown : By default, a "chown -R" command is run on the target
+ directory after extraction, so that all files belong to the current
+ user. This is mostly needed if you are running as root, as tar will then
+ try to recreate the initial user ownerships. You may disable this
+ behavior with this flag.
+ * --tar : Run the tar command on the contents of the archive, using the
+ following arguments as parameter for the command.
+ * --noexec : Do not run the embedded script after extraction.
+
+ Any subsequent arguments to the archive will be passed as additional
+ arguments to the embedded command. You should explicitly use the -- special
+ command-line construct before any such options to make sure that Makeself
+ will not try to interpret them.
+
+License
+
+ Makeself is covered by the [10]GNU General Public License (GPL) version 2
+ and above. Archives generated by Makeself don't have to be placed under this
+ license (although I encourage it ;-)), since the archive itself is merely
+ data for Makeself.
+
+Download
+
+ Get the latest official distribution [11]here (version 2.1.5).
+
+ The latest development version can be grabbed from the Loki Setup CVS
+ module, at [12]cvs.icculus.org.
+
+Version history
+
+ * v1.0: Initial public release
+ * v1.1: The archive can be passed parameters that will be passed on to the
+ embedded script, thanks to John C. Quillan
+ * v1.2: Cosmetic updates, support for bzip2 compression and non-temporary
+ archives. Many ideas thanks to Francois Petitjean.
+ * v1.3: More patches from Bjarni R. Einarsson and Francois Petitjean:
+ Support for no compression (--nocomp), script is no longer mandatory,
+ automatic launch in an xterm, optional verbose output, and -target
+ archive option to indicate where to extract the files.
+ * v1.4: Many patches from Francois Petitjean: improved UNIX compatibility,
+ automatic integrity checking, support of LSM files to get info on the
+ package at run time..
+ * v1.5.x: A lot of bugfixes, and many other patches, including automatic
+ verification through the usage of checksums. Version 1.5.5 was the
+ stable release for a long time, even though the Web page didn't get
+ updated ;-). Makeself was also officially made a part of the [13]Loki
+ Setup installer, and its source is being maintained as part of this
+ package.
+ * v2.0: Complete internal rewrite of Makeself. The command-line parsing
+ was vastly improved, the overall maintenance of the package was greatly
+ improved by separating the stub from makeself.sh. Also Makeself was
+ ported and tested to a variety of Unix platforms.
+ * v2.0.1: First public release of the new 2.0 branch. Prior versions are
+ officially obsoleted. This release introduced the '--copy' argument that
+ was introduced in response to a need for the [14]UT2K3 Linux installer.
+ * v2.1.0: Big change : Makeself can now support multiple embedded
+ tarballs, each stored separately with their own checksums. An existing
+ archive can be updated with the --append flag. Checksums are also better
+ managed, and the --nochown option for archives appeared.
+ * v2.1.1: Fixes related to the Unix compression (compress command). Some
+ Linux distributions made the insane choice to make it unavailable, even
+ though gzip is capable of uncompressing these files, plus some more
+ bugfixes in the extraction and checksum code.
+ * v2.1.2: Some bug fixes. Use head -n to avoid problems with POSIX
+ conformance.
+ * v2.1.3: Bug fixes with the command line when spawning terminals. Added
+ --tar, --noexec for archives. Added --nomd5 and --nocrc to avoid
+ creating checksums in archives. The embedded script is now run through
+ "eval". The --info output now includes the command used to create the
+ archive. A man page was contributed by Bartosz Fenski.
+ * v2.1.4: Fixed --info output. Generate random directory name when
+ extracting files to . to avoid problems. Better handling of errors with
+ wrong permissions for the directory containing the files. Avoid some
+ race conditions, Unset the $CDPATH variable to avoid problems if it is
+ set. Better handling of dot files in the archive directory.
+ * v2.1.5: Made the md5sum detection consistent with the header code. Check
+ for the presence of the archive directory. Added --encrypt for symmetric
+ encryption through gpg (Eric Windisch). Added support for the digest
+ command on Solaris 10 for MD5 checksums. Check for available disk space
+ before extracting to the target directory (Andreas Schweitzer). Allow
+ extraction to run asynchronously (patch by Peter Hatch). Use file
+ descriptors internally to avoid error messages (patch by Kay Tiong
+ Khoo).
+
+Links
+
+ * Check out the [15]"Loki setup" installer, used to install many Linux
+ games and other applications, and of which I am the co-author. Since the
+ demise of Loki, I am now the official maintainer of the project, and it
+ is now being hosted on [16]icculus.org, as well as a bunch of other
+ ex-Loki projects (and a lot of other good stuff!).
+ * Bjarni R. Einarsson also wrote the setup.sh installer script, inspired
+ by Makeself. [17]Check it out !
+
+Contact
+
+ This script was written by [18]Stéphane Peter (megastep at megastep.org) I
+ welcome any enhancements and suggestions.
+
+ Contributions were included from John C. Quillan, Bjarni R. Einarsson,
+ Francois Petitjean, and Ryan C. Gordon, thanks to them! If you think I
+ forgot your name, don't hesitate to contact me.
+
+ icculus.org also has a [19]Bugzilla server available that allows bug reports
+ to be submitted for Loki setup, and since Makeself is a part of Loki setup,
+ you can submit bug reports from there!
+ _________________________________________________________________
+
+
+ [20]Stéphane Peter
+
+ Last modified: Fri Jan 4 15:51:05 PST 2008
+
+References
+
+ 1. http://mowser.com/web/megastep.org/makeself/
+ 2. http://www.megastep.org/makeself/makeself.run
+ 3. mailto:megastep at REMOVEME.megastep.org
+ 4. http://www.idsoftware.com/
+ 5. http://www.lokigames.com/products/myth2/updates.php3
+ 6. http://www.nvidia.com/
+ 7. http://earth.google.com/
+ 8. http://www.megastep.org/makeself/makeself.run
+ 9. http://www.megastep.org/makeself/makeself.run
+ 10. http://www.gnu.org/copyleft/gpl.html
+ 11. http://www.megastep.org/makeself/makeself-2.1.5.run
+ 12. http://cvs.icculus.org/
+ 13. http://www.icculus.org/loki_setup/
+ 14. http://www.unrealtournament2003.com/
+ 15. http://www.icculus.org/loki_setup/
+ 16. http://www.icculus.org/
+ 17. http://www.mmedia.is/~bre/programs/setup.sh/
+ 18. mailto:megastep@@megastep.org
+ 19. https://bugzilla.icculus.org/
+ 20. mailto:megastep@@megastep.org
+ ./makeself-2.1.5/makeself-header.sh 0000777 0001750 0001750 00000022643 11261350671 016062 0 ustar mattm mattm cat << EOF > "$archname"
+#!/bin/sh
+# This script was generated using Makeself $MS_VERSION
+
+CRCsum="$CRCsum"
+MD5="$MD5sum"
+TMPROOT=\${TMPDIR:=/tmp}
+
+label="$LABEL"
+script="$SCRIPT"
+scriptargs="$SCRIPTARGS"
+targetdir="$archdirname"
+filesizes="$filesizes"
+keep=$KEEP
+
+print_cmd_arg=""
+if type printf > /dev/null; then
+ print_cmd="printf"
+elif test -x /usr/ucb/echo; then
+ print_cmd="/usr/ucb/echo"
+else
+ print_cmd="echo"
+fi
+
+unset CDPATH
+
+MS_Printf()
+{
+ \$print_cmd \$print_cmd_arg "\$1"
+}
+
+MS_Progress()
+{
+ while read a; do
+ MS_Printf .
+ done
+}
+
+MS_diskspace()
+{
+ (
+ if test -d /usr/xpg4/bin; then
+ PATH=/usr/xpg4/bin:\$PATH
+ fi
+ df -kP "\$1" | tail -1 | awk '{print \$4}'
+ )
+}
+
+MS_dd()
+{
+ blocks=\`expr \$3 / 1024\`
+ bytes=\`expr \$3 % 1024\`
+ dd if="\$1" ibs=\$2 skip=1 obs=1024 conv=sync 2> /dev/null | \\
+ { test \$blocks -gt 0 && dd ibs=1024 obs=1024 count=\$blocks ; \\
+ test \$bytes -gt 0 && dd ibs=1 obs=1024 count=\$bytes ; } 2> /dev/null
+}
+
+MS_Help()
+{
+ cat << EOH >&2
+Makeself version $MS_VERSION
+ 1) Getting help or info about \$0 :
+ \$0 --help Print this message
+ \$0 --info Print embedded info : title, default target directory, embedded script ...
+ \$0 --lsm Print embedded lsm entry (or no LSM)
+ \$0 --list Print the list of files in the archive
+ \$0 --check Checks integrity of the archive
+
+ 2) Running \$0 :
+ \$0 [options] [--] [additional arguments to embedded script]
+ with following options (in that order)
+ --confirm Ask before running embedded script
+ --noexec Do not run embedded script
+ --keep Do not erase target directory after running
+ the embedded script
+ --nox11 Do not spawn an xterm
+ --nochown Do not give the extracted files to the current user
+ --target NewDirectory Extract in NewDirectory
+ --tar arg1 [arg2 ...] Access the contents of the archive through the tar command
+ -- Following arguments will be passed to the embedded script
+EOH
+}
+
+MS_Check()
+{
+ OLD_PATH="\$PATH"
+ PATH=\${GUESS_MD5_PATH:-"\$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"}
+ MD5_ARG=""
+ MD5_PATH=\`exec <&- 2>&-; which md5sum || type md5sum\`
+ test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which md5 || type md5\`
+ test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which digest || type digest\`
+ PATH="\$OLD_PATH"
+
+ MS_Printf "Verifying archive integrity..."
+ offset=\`head -n $SKIP "\$1" | wc -c | tr -d " "\`
+ verb=\$2
+ i=1
+ for s in \$filesizes
+ do
+ crc=\`echo \$CRCsum | cut -d" " -f\$i\`
+ if test -x "\$MD5_PATH"; then
+ if test \`basename \$MD5_PATH\` = digest; then
+ MD5_ARG="-a md5"
+ fi
+ md5=\`echo \$MD5 | cut -d" " -f\$i\`
+ if test \$md5 = "00000000000000000000000000000000"; then
+ test x\$verb = xy && echo " \$1 does not contain an embedded MD5 checksum." >&2
+ else
+ md5sum=\`MS_dd "\$1" \$offset \$s | eval "\$MD5_PATH \$MD5_ARG" | cut -b-32\`;
+ if test "\$md5sum" != "\$md5"; then
+ echo "Error in MD5 checksums: \$md5sum is different from \$md5" >&2
+ exit 2
+ else
+ test x\$verb = xy && MS_Printf " MD5 checksums are OK." >&2
+ fi
+ crc="0000000000"; verb=n
+ fi
+ fi
+ if test \$crc = "0000000000"; then
+ test x\$verb = xy && echo " \$1 does not contain a CRC checksum." >&2
+ else
+ sum1=\`MS_dd "\$1" \$offset \$s | CMD_ENV=xpg4 cksum | awk '{print \$1}'\`
+ if test "\$sum1" = "\$crc"; then
+ test x\$verb = xy && MS_Printf " CRC checksums are OK." >&2
+ else
+ echo "Error in checksums: \$sum1 is different from \$crc"
+ exit 2;
+ fi
+ fi
+ i=\`expr \$i + 1\`
+ offset=\`expr \$offset + \$s\`
+ done
+ echo " All good."
+}
+
+UnTAR()
+{
+ tar \$1vf - 2>&1 || { echo Extraction failed. > /dev/tty; kill -15 \$$; }
+}
+
+finish=true
+xterm_loop=
+nox11=$NOX11
+copy=$COPY
+ownership=y
+verbose=n
+
+initargs="\$@"
+
+while true
+do
+ case "\$1" in
+ -h | --help)
+ MS_Help
+ exit 0
+ ;;
+ --info)
+ echo Identification: "\$label"
+ echo Target directory: "\$targetdir"
+ echo Uncompressed size: $USIZE KB
+ echo Compression: $COMPRESS
+ echo Date of packaging: $DATE
+ echo Built with Makeself version $MS_VERSION on $OSTYPE
+ echo Build command was: "$MS_COMMAND"
+ if test x\$script != x; then
+ echo Script run after extraction:
+ echo " " \$script \$scriptargs
+ fi
+ if test x"$copy" = xcopy; then
+ echo "Archive will copy itself to a temporary location"
+ fi
+ if test x"$KEEP" = xy; then
+ echo "directory \$targetdir is permanent"
+ else
+ echo "\$targetdir will be removed after extraction"
+ fi
+ exit 0
+ ;;
+ --dumpconf)
+ echo LABEL=\"\$label\"
+ echo SCRIPT=\"\$script\"
+ echo SCRIPTARGS=\"\$scriptargs\"
+ echo archdirname=\"$archdirname\"
+ echo KEEP=$KEEP
+ echo COMPRESS=$COMPRESS
+ echo filesizes=\"\$filesizes\"
+ echo CRCsum=\"\$CRCsum\"
+ echo MD5sum=\"\$MD5\"
+ echo OLDUSIZE=$USIZE
+ echo OLDSKIP=`expr $SKIP + 1`
+ exit 0
+ ;;
+ --lsm)
+cat << EOLSM
+EOF
+eval "$LSM_CMD"
+cat << EOF >> "$archname"
+EOLSM
+ exit 0
+ ;;
+ --list)
+ echo Target directory: \$targetdir
+ offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+ for s in \$filesizes
+ do
+ MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | UnTAR t
+ offset=\`expr \$offset + \$s\`
+ done
+ exit 0
+ ;;
+ --tar)
+ offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+ arg1="\$2"
+ shift 2
+ for s in \$filesizes
+ do
+ MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | tar "\$arg1" - \$*
+ offset=\`expr \$offset + \$s\`
+ done
+ exit 0
+ ;;
+ --check)
+ MS_Check "\$0" y
+ exit 0
+ ;;
+ --confirm)
+ verbose=y
+ shift
+ ;;
+ --noexec)
+ script=""
+ shift
+ ;;
+ --keep)
+ keep=y
+ shift
+ ;;
+ --target)
+ keep=y
+ targetdir=\${2:-.}
+ shift 2
+ ;;
+ --nox11)
+ nox11=y
+ shift
+ ;;
+ --nochown)
+ ownership=n
+ shift
+ ;;
+ --xwin)
+ finish="echo Press Return to close this window...; read junk"
+ xterm_loop=1
+ shift
+ ;;
+ --phase2)
+ copy=phase2
+ shift
+ ;;
+ --)
+ shift
+ break ;;
+ -*)
+ echo Unrecognized flag : "\$1" >&2
+ MS_Help
+ exit 1
+ ;;
+ *)
+ break ;;
+ esac
+done
+
+case "\$copy" in
+copy)
+ tmpdir=\$TMPROOT/makeself.\$RANDOM.\`date +"%y%m%d%H%M%S"\`.\$\$
+ mkdir "\$tmpdir" || {
+ echo "Could not create temporary directory \$tmpdir" >&2
+ exit 1
+ }
+ SCRIPT_COPY="\$tmpdir/makeself"
+ echo "Copying to a temporary location..." >&2
+ cp "\$0" "\$SCRIPT_COPY"
+ chmod +x "\$SCRIPT_COPY"
+ cd "\$TMPROOT"
+ exec "\$SCRIPT_COPY" --phase2 -- \$initargs
+ ;;
+phase2)
+ finish="\$finish ; rm -rf \`dirname \$0\`"
+ ;;
+esac
+
+if test "\$nox11" = "n"; then
+ if tty -s; then # Do we have a terminal?
+ :
+ else
+ if test x"\$DISPLAY" != x -a x"\$xterm_loop" = x; then # No, but do we have X?
+ if xset q > /dev/null 2>&1; then # Check for valid DISPLAY variable
+ GUESS_XTERMS="xterm rxvt dtterm eterm Eterm kvt konsole aterm"
+ for a in \$GUESS_XTERMS; do
+ if type \$a >/dev/null 2>&1; then
+ XTERM=\$a
+ break
+ fi
+ done
+ chmod a+x \$0 || echo Please add execution rights on \$0
+ if test \`echo "\$0" | cut -c1\` = "/"; then # Spawn a terminal!
+ exec \$XTERM -title "\$label" -e "\$0" --xwin "\$initargs"
+ else
+ exec \$XTERM -title "\$label" -e "./\$0" --xwin "\$initargs"
+ fi
+ fi
+ fi
+ fi
+fi
+
+if test "\$targetdir" = "."; then
+ tmpdir="."
+else
+ if test "\$keep" = y; then
+ echo "Creating directory \$targetdir" >&2
+ tmpdir="\$targetdir"
+ dashp="-p"
+ else
+ tmpdir="\$TMPROOT/selfgz\$\$\$RANDOM"
+ dashp=""
+ fi
+ mkdir \$dashp \$tmpdir || {
+ echo 'Cannot create target directory' \$tmpdir >&2
+ echo 'You should try option --target OtherDirectory' >&2
+ eval \$finish
+ exit 1
+ }
+fi
+
+location="\`pwd\`"
+if test x\$SETUP_NOCHECK != x1; then
+ MS_Check "\$0"
+fi
+offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+
+if test x"\$verbose" = xy; then
+ MS_Printf "About to extract $USIZE KB in \$tmpdir ... Proceed ? [Y/n] "
+ read yn
+ if test x"\$yn" = xn; then
+ eval \$finish; exit 1
+ fi
+fi
+
+MS_Printf "Uncompressing \$label"
+res=3
+if test "\$keep" = n; then
+ trap 'echo Signal caught, cleaning up >&2; cd \$TMPROOT; /bin/rm -rf \$tmpdir; eval \$finish; exit 15' 1 2 3 15
+fi
+
+leftspace=\`MS_diskspace \$tmpdir\`
+if test \$leftspace -lt $USIZE; then
+ echo
+ echo "Not enough space left in "\`dirname \$tmpdir\`" (\$leftspace KB) to decompress \$0 ($USIZE KB)" >&2
+ if test "\$keep" = n; then
+ echo "Consider setting TMPDIR to a directory with more free space."
+ fi
+ eval \$finish; exit 1
+fi
+
+for s in \$filesizes
+do
+ if MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | ( cd "\$tmpdir"; UnTAR x ) | MS_Progress; then
+ if test x"\$ownership" = xy; then
+ (PATH=/usr/xpg4/bin:\$PATH; cd "\$tmpdir"; chown -R \`id -u\` .; chgrp -R \`id -g\` .)
+ fi
+ else
+ echo
+ echo "Unable to decompress \$0" >&2
+ eval \$finish; exit 1
+ fi
+ offset=\`expr \$offset + \$s\`
+done
+echo
+
+cd "\$tmpdir"
+res=0
+if test x"\$script" != x; then
+ if test x"\$verbose" = xy; then
+ MS_Printf "OK to execute: \$script \$scriptargs \$* ? [Y/n] "
+ read yn
+ if test x"\$yn" = x -o x"\$yn" = xy -o x"\$yn" = xY; then
+ eval \$script \$scriptargs \$*; res=\$?;
+ fi
+ else
+ eval \$script \$scriptargs \$*; res=\$?
+ fi
+ if test \$res -ne 0; then
+ test x"\$verbose" = xy && echo "The program '\$script' returned an error code (\$res)" >&2
+ fi
+fi
+if test "\$keep" = n; then
+ cd \$TMPROOT
+ /bin/rm -rf \$tmpdir
+fi
+eval \$finish; exit \$res
+EOF
+ ./makeself-2.1.5/makeself.lsm 0000666 0001750 0001750 00000001477 11261350671 015014 0 ustar mattm mattm Begin3
+Title: makeself.sh
+Version: 2.1
+Description: makeself.sh is a shell script that generates a self-extractable
+ tar.gz archive from a directory. The resulting file appears as a shell
+ script, and can be launched as is. The archive will then uncompress
+ itself to a temporary directory and an arbitrary command will be
+ executed (for example an installation script). This is pretty similar
+ to archives generated with WinZip Self-Extractor in the Windows world.
+Keywords: Installation archive tar winzip
+Author: Stéphane Peter (megastep at megastep.org)
+Maintained-by: Stéphane Peter (megastep at megastep.org)
+Original-site: http://www.megastep.org/makeself/
+Platform: Unix
+Copying-policy: GPL
+End
+ ./makeself-2.1.5/.svn/ 0000777 0001750 0001750 00000000000 11261353070 013357 5 ustar mattm mattm ./makeself-2.1.5/.svn/prop-base/ 0000777 0001750 0001750 00000000000 11261350671 015253 5 ustar mattm mattm ./makeself-2.1.5/.svn/prop-base/makeself-header.sh.svn-base 0000444 0001750 0001750 00000000036 11261350671 022332 0 ustar mattm mattm K 14
+svn:executable
+V 1
+*
+END
+ ./makeself-2.1.5/.svn/prop-base/makeself.sh.svn-base 0000444 0001750 0001750 00000000036 11261350671 021104 0 ustar mattm mattm K 14
+svn:executable
+V 1
+*
+END
+ ./makeself-2.1.5/.svn/format 0000444 0001750 0001750 00000000002 11261350671 014560 0 ustar mattm mattm 9
+ ./makeself-2.1.5/.svn/entries 0000444 0001750 0001750 00000002472 11261353070 014752 0 ustar mattm mattm 9
+
+dir
+5354
+svn+ssh://mattm@svn.wald.intevation.org/openvas/trunk/tools/openvas-lsc-target-preparation/makeself-2.1.5
+svn+ssh://mattm@svn.wald.intevation.org/openvas
+
+
+
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+svn:special svn:externals svn:needs-lock
+
+
+
+
+
+
+
+
+
+
+
+423fd1db-d629-0410-8442-d21db03e70f4
+
+makeself.sh
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+fbfa1c23609b3f7f1f7d9d9f96de54cd
+2009-02-17T21:22:15.648627Z
+2519
+jan
+has-props
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+11923
+
+makeself.lsm
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+d561c470b811579fa4e7ecbf6401a7c9
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+831
+
+TODO
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+3789dfb37e9785018a1e6d45cb2c2e3c
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+209
+
+makeself-header.sh
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+e9bf3281b312436539e4558614b7b72b
+2009-02-17T21:22:15.648627Z
+2519
+jan
+has-props
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+9635
+
+makeself.1
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+35d6f5eec5fea68623e84124b7a45de6
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+1815
+
+COPYING
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+ea5bed2f60d357618ca161ad539f7c0a
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+18008
+
+README
+file
+
+
+
+
+2009-10-02T10:11:05.000000Z
+ecff162be39edf6df2fe2fbee6182ba3
+2009-02-17T21:22:15.648627Z
+2519
+jan
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+16395
+
+ ./makeself-2.1.5/.svn/tmp/ 0000777 0001750 0001750 00000000000 11261353070 014157 5 ustar mattm mattm ./makeself-2.1.5/.svn/tmp/prop-base/ 0000777 0001750 0001750 00000000000 11261350671 016053 5 ustar mattm mattm ./makeself-2.1.5/.svn/tmp/props/ 0000777 0001750 0001750 00000000000 11261350671 015326 5 ustar mattm mattm ./makeself-2.1.5/.svn/tmp/text-base/ 0000777 0001750 0001750 00000000000 11261350671 016057 5 ustar mattm mattm ./makeself-2.1.5/.svn/props/ 0000777 0001750 0001750 00000000000 11261350671 014526 5 ustar mattm mattm ./makeself-2.1.5/.svn/text-base/ 0000777 0001750 0001750 00000000000 11261350671 015257 5 ustar mattm mattm ./makeself-2.1.5/.svn/text-base/TODO.svn-base 0000444 0001750 0001750 00000000321 11261350671 017452 0 ustar mattm mattm What needs to be done next :
+
+- Generic compression code (thru a user-defined command)
+- Collect names of directories potentially containing md5 program. GUESS_MD5_PATH
+
+Stéphane Peter <megastep at megastep.org>
+ ./makeself-2.1.5/.svn/text-base/README.svn-base 0000444 0001750 0001750 00000040013 11261350671 017644 0 ustar mattm mattm The following was generated from http://www.megastep.org/makeself/
+-----------------------
+
+
+ #[1]Mobile/PDA
+
+ makeself - Make self-extractable archives on Unix
+
+ [2]makeself.sh is a small shell script that generates a self-extractable
+ tar.gz archive from a directory. The resulting file appears as a shell
+ script (many of those have a .run suffix), and can be launched as is. The
+ archive will then uncompress itself to a temporary directory and an optional
+ arbitrary command will be executed (for example an installation script).
+ This is pretty similar to archives generated with WinZip Self-Extractor in
+ the Windows world. Makeself archives also include checksums for integrity
+ self-validation (CRC and/or MD5 checksums).
+
+ The makeself.sh script itself is used only to create the archives from a
+ directory of files. The resultant archive is actually a compressed (using
+ gzip, bzip2, or compress) TAR archive, with a small shell script stub at the
+ beginning. This small stub performs all the steps of extracting the files,
+ running the embedded command, and removing the temporary files when it's all
+ over. All what the user has to do to install the software contained in such
+ an archive is to "run" the archive, i.e sh nice-software.run. I recommend
+ using the "run" (which was introduced by some Makeself archives released by
+ Loki Software) or "sh" suffix for such archives not to confuse the users,
+ since they know it's actually shell scripts (with quite a lot of binary data
+ attached to it though!).
+
+ I am trying to keep the code of this script as portable as possible, i.e
+ it's not relying on any bash-specific features and only calls commands that
+ are installed on any functioning UNIX-compatible system. This script as well
+ as the archives it generates should run on any Unix flavor, with any
+ compatible Bourne shell, provided of course that the compression programs
+ are available.
+
+ As of version 2.1, Makeself has been rewritten and tested on the following
+ platforms :
+ * Linux (all distributions)
+ * Sun Solaris (8 tested)
+ * HP-UX (tested on 11.0 and 11i on HPPA RISC)
+ * SCO OpenUnix and OpenServer
+ * IBM AIX 5.1L
+ * MacOS X (Darwin)
+ * SGI IRIX 6.5
+ * FreeBSD
+ * UnicOS / Cray
+
+ If you successfully run Makeself and/or archives created with it on another
+ system, then [3]let me know!
+
+ Examples of publicly available archives made using makeself are :
+ * Game patches and installers for [4]Id Software games like Quake 3 for
+ Linux or Return To Castle Wolfenstien ;
+ * All game patches released by [5]Loki Software for the Linux version of
+ popular games ;
+ * The [6]nVidia drivers for Linux
+ * The installer for the Linux version of [7]Google Earth
+ * The [8]Makeself distribution itself ;-)
+ * and countless others...
+
+ Important note for Apache users: By default, most Web servers will think
+ that Makeself archives are regular text files and thus they may show up as
+ text in a Web browser. The correct way to prevent this is to add a MIME type
+ for this file format, like so (in httpd.conf) :
+ AddType application/x-makeself .run
+
+ Important note for recent GNU/Linux distributions: Archives created with
+ Makeself prior to v2.1.2 were using an old syntax for the head and tail Unix
+ commands that is being progressively obsoleted in their GNU forms. Therefore
+ you may have problems uncompressing some of these archives. A workaround for
+ this is to set the environment variable $_POSIX2_VERSION to enable the old
+ syntax, i.e. :
+ export _POSIX2_VERSION=199209
+
+Usage
+
+ The syntax of makeself is the following:
+
+ makeself.sh [args] archive_dir file_name label startup_script [script_args]
+ * args are optional options for Makeself. The available ones are :
+ + --version : Prints the version number on stdout, then exits
+ immediately
+ + --gzip : Use gzip for compression (is the default on platforms on
+ which gzip is commonly available, like Linux)
+ + --bzip2 : Use bzip2 instead of gzip for better compression. The
+ bzip2 command must be available in the command path. I recommend
+ that you set the prefix to something like '.bz2.run' for the
+ archive, so that potential users know that they'll need bzip2 to
+ extract it.
+ + --compress : Use the UNIX "compress" command to compress the data.
+ This should be the default on all platforms that don't have gzip
+ available.
+ + --nocomp : Do not use any compression for the archive, which will
+ then be an uncompressed TAR.
+ + --notemp : The generated archive will not extract the files to a
+ temporary directory, but in a new directory created in the current
+ directory. This is better to distribute software packages that may
+ extract and compile by themselves (i.e. launch the compilation
+ through the embedded script).
+ + --current : Files will be extracted to the current directory,
+ instead of in a subdirectory. This option implies --notemp above.
+ + --follow : Follow the symbolic links inside of the archive
+ directory, i.e. store the files that are being pointed to instead
+ of the links themselves.
+ + --append (new in 2.1.x): Append data to an existing archive,
+ instead of creating a new one. In this mode, the settings from the
+ original archive are reused (compression type, label, embedded
+ script), and thus don't need to be specified again on the command
+ line.
+ + --header : Makeself 2.0 uses a separate file to store the header
+ stub, called "makeself-header.sh". By default, it is assumed that
+ it is stored in the same location as makeself.sh. This option can
+ be used to specify its actual location if it is stored someplace
+ else.
+ + --copy : Upon extraction, the archive will first extract itself to
+ a temporary directory. The main application of this is to allow
+ self-contained installers stored in a Makeself archive on a CD,
+ when the installer program will later need to unmount the CD and
+ allow a new one to be inserted. This prevents "Filesystem busy"
+ errors for installers that span multiple CDs.
+ + --nox11 : Disable the automatic spawning of a new terminal in X11.
+ + --nowait : When executed from a new X11 terminal, disable the user
+ prompt at the end of the script execution.
+ + --nomd5 and --nocrc : Disable the creation of a MD5 / CRC checksum
+ for the archive. This speeds up the extraction process if integrity
+ checking is not necessary.
+ + --lsm file : Provide and LSM file to makeself, that will be
+ embedded in the generated archive. LSM files are describing a
+ software package in a way that is easily parseable. The LSM entry
+ can then be later retrieved using the '-lsm' argument to the
+ archive. An exemple of a LSM file is provided with Makeself.
+ * archive_dir is the name of the directory that contains the files to be
+ archived
+ * file_name is the name of the archive to be created
+ * label is an arbitrary text string describing the package. It will be
+ displayed while extracting the files.
+ * startup_script is the command to be executed from within the directory
+ of extracted files. Thus, if you wish to execute a program contain in
+ this directory, you must prefix your command with "./". For example,
+ ./program will be fine. The script_args are additionnal arguments for
+ this command.
+
+ Here is an example, assuming the user has a package image stored in a
+ /home/joe/mysoft, and he wants to generate a self-extracting package named
+ mysoft.sh, which will launch the "setup" script initially stored in
+ /home/joe/mysoft :
+
+ makeself.sh /home/joe/mysoft mysoft.sh "Joe's Nice Software Package" ./setup
+ Here is also how I created the [9]makeself.run archive which contains the
+ Makeself distribution :
+
+ makeself.sh --notemp makeself makeself.run "Makeself by Stephane Peter" echo
+ "Makeself has extracted itself"
+
+ Archives generated with Makeself 2.1 can be passed the following arguments:
+
+ * --keep : Prevent the files to be extracted in a temporary directory that
+ will be removed after the embedded script's execution. The files will
+ then be extracted in the current working directory and will stay here
+ until you remove them.
+ * --verbose : Will prompt the user before executing the embedded command
+ * --target dir : Allows to extract the archive in an arbitrary place.
+ * --nox11 : Do not spawn a X11 terminal.
+ * --confirm : Prompt the user for confirmation before running the embedded
+ command.
+ * --info : Print out general information about the archive (does not
+ extract).
+ * --lsm : Print out the LSM entry, if it is present.
+ * --list : List the files in the archive.
+ * --check : Check the archive for integrity using the embedded checksums.
+ Does not extract the archive.
+ * --nochown : By default, a "chown -R" command is run on the target
+ directory after extraction, so that all files belong to the current
+ user. This is mostly needed if you are running as root, as tar will then
+ try to recreate the initial user ownerships. You may disable this
+ behavior with this flag.
+ * --tar : Run the tar command on the contents of the archive, using the
+ following arguments as parameter for the command.
+ * --noexec : Do not run the embedded script after extraction.
+
+ Any subsequent arguments to the archive will be passed as additional
+ arguments to the embedded command. You should explicitly use the -- special
+ command-line construct before any such options to make sure that Makeself
+ will not try to interpret them.
+
+License
+
+ Makeself is covered by the [10]GNU General Public License (GPL) version 2
+ and above. Archives generated by Makeself don't have to be placed under this
+ license (although I encourage it ;-)), since the archive itself is merely
+ data for Makeself.
+
+Download
+
+ Get the latest official distribution [11]here (version 2.1.5).
+
+ The latest development version can be grabbed from the Loki Setup CVS
+ module, at [12]cvs.icculus.org.
+
+Version history
+
+ * v1.0: Initial public release
+ * v1.1: The archive can be passed parameters that will be passed on to the
+ embedded script, thanks to John C. Quillan
+ * v1.2: Cosmetic updates, support for bzip2 compression and non-temporary
+ archives. Many ideas thanks to Francois Petitjean.
+ * v1.3: More patches from Bjarni R. Einarsson and Francois Petitjean:
+ Support for no compression (--nocomp), script is no longer mandatory,
+ automatic launch in an xterm, optional verbose output, and -target
+ archive option to indicate where to extract the files.
+ * v1.4: Many patches from Francois Petitjean: improved UNIX compatibility,
+ automatic integrity checking, support of LSM files to get info on the
+ package at run time..
+ * v1.5.x: A lot of bugfixes, and many other patches, including automatic
+ verification through the usage of checksums. Version 1.5.5 was the
+ stable release for a long time, even though the Web page didn't get
+ updated ;-). Makeself was also officially made a part of the [13]Loki
+ Setup installer, and its source is being maintained as part of this
+ package.
+ * v2.0: Complete internal rewrite of Makeself. The command-line parsing
+ was vastly improved, the overall maintenance of the package was greatly
+ improved by separating the stub from makeself.sh. Also Makeself was
+ ported and tested to a variety of Unix platforms.
+ * v2.0.1: First public release of the new 2.0 branch. Prior versions are
+ officially obsoleted. This release introduced the '--copy' argument that
+ was introduced in response to a need for the [14]UT2K3 Linux installer.
+ * v2.1.0: Big change : Makeself can now support multiple embedded
+ tarballs, each stored separately with their own checksums. An existing
+ archive can be updated with the --append flag. Checksums are also better
+ managed, and the --nochown option for archives appeared.
+ * v2.1.1: Fixes related to the Unix compression (compress command). Some
+ Linux distributions made the insane choice to make it unavailable, even
+ though gzip is capable of uncompressing these files, plus some more
+ bugfixes in the extraction and checksum code.
+ * v2.1.2: Some bug fixes. Use head -n to avoid problems with POSIX
+ conformance.
+ * v2.1.3: Bug fixes with the command line when spawning terminals. Added
+ --tar, --noexec for archives. Added --nomd5 and --nocrc to avoid
+ creating checksums in archives. The embedded script is now run through
+ "eval". The --info output now includes the command used to create the
+ archive. A man page was contributed by Bartosz Fenski.
+ * v2.1.4: Fixed --info output. Generate random directory name when
+ extracting files to . to avoid problems. Better handling of errors with
+ wrong permissions for the directory containing the files. Avoid some
+ race conditions, Unset the $CDPATH variable to avoid problems if it is
+ set. Better handling of dot files in the archive directory.
+ * v2.1.5: Made the md5sum detection consistent with the header code. Check
+ for the presence of the archive directory. Added --encrypt for symmetric
+ encryption through gpg (Eric Windisch). Added support for the digest
+ command on Solaris 10 for MD5 checksums. Check for available disk space
+ before extracting to the target directory (Andreas Schweitzer). Allow
+ extraction to run asynchronously (patch by Peter Hatch). Use file
+ descriptors internally to avoid error messages (patch by Kay Tiong
+ Khoo).
+
+Links
+
+ * Check out the [15]"Loki setup" installer, used to install many Linux
+ games and other applications, and of which I am the co-author. Since the
+ demise of Loki, I am now the official maintainer of the project, and it
+ is now being hosted on [16]icculus.org, as well as a bunch of other
+ ex-Loki projects (and a lot of other good stuff!).
+ * Bjarni R. Einarsson also wrote the setup.sh installer script, inspired
+ by Makeself. [17]Check it out !
+
+Contact
+
+ This script was written by [18]Stéphane Peter (megastep at megastep.org) I
+ welcome any enhancements and suggestions.
+
+ Contributions were included from John C. Quillan, Bjarni R. Einarsson,
+ Francois Petitjean, and Ryan C. Gordon, thanks to them! If you think I
+ forgot your name, don't hesitate to contact me.
+
+ icculus.org also has a [19]Bugzilla server available that allows bug reports
+ to be submitted for Loki setup, and since Makeself is a part of Loki setup,
+ you can submit bug reports from there!
+ _________________________________________________________________
+
+
+ [20]Stéphane Peter
+
+ Last modified: Fri Jan 4 15:51:05 PST 2008
+
+References
+
+ 1. http://mowser.com/web/megastep.org/makeself/
+ 2. http://www.megastep.org/makeself/makeself.run
+ 3. mailto:megastep at REMOVEME.megastep.org
+ 4. http://www.idsoftware.com/
+ 5. http://www.lokigames.com/products/myth2/updates.php3
+ 6. http://www.nvidia.com/
+ 7. http://earth.google.com/
+ 8. http://www.megastep.org/makeself/makeself.run
+ 9. http://www.megastep.org/makeself/makeself.run
+ 10. http://www.gnu.org/copyleft/gpl.html
+ 11. http://www.megastep.org/makeself/makeself-2.1.5.run
+ 12. http://cvs.icculus.org/
+ 13. http://www.icculus.org/loki_setup/
+ 14. http://www.unrealtournament2003.com/
+ 15. http://www.icculus.org/loki_setup/
+ 16. http://www.icculus.org/
+ 17. http://www.mmedia.is/~bre/programs/setup.sh/
+ 18. mailto:megastep@@megastep.org
+ 19. https://bugzilla.icculus.org/
+ 20. mailto:megastep@@megastep.org
+ ./makeself-2.1.5/.svn/text-base/makeself-header.sh.svn-base 0000444 0001750 0001750 00000022643 11261350671 022346 0 ustar mattm mattm cat << EOF > "$archname"
+#!/bin/sh
+# This script was generated using Makeself $MS_VERSION
+
+CRCsum="$CRCsum"
+MD5="$MD5sum"
+TMPROOT=\${TMPDIR:=/tmp}
+
+label="$LABEL"
+script="$SCRIPT"
+scriptargs="$SCRIPTARGS"
+targetdir="$archdirname"
+filesizes="$filesizes"
+keep=$KEEP
+
+print_cmd_arg=""
+if type printf > /dev/null; then
+ print_cmd="printf"
+elif test -x /usr/ucb/echo; then
+ print_cmd="/usr/ucb/echo"
+else
+ print_cmd="echo"
+fi
+
+unset CDPATH
+
+MS_Printf()
+{
+ \$print_cmd \$print_cmd_arg "\$1"
+}
+
+MS_Progress()
+{
+ while read a; do
+ MS_Printf .
+ done
+}
+
+MS_diskspace()
+{
+ (
+ if test -d /usr/xpg4/bin; then
+ PATH=/usr/xpg4/bin:\$PATH
+ fi
+ df -kP "\$1" | tail -1 | awk '{print \$4}'
+ )
+}
+
+MS_dd()
+{
+ blocks=\`expr \$3 / 1024\`
+ bytes=\`expr \$3 % 1024\`
+ dd if="\$1" ibs=\$2 skip=1 obs=1024 conv=sync 2> /dev/null | \\
+ { test \$blocks -gt 0 && dd ibs=1024 obs=1024 count=\$blocks ; \\
+ test \$bytes -gt 0 && dd ibs=1 obs=1024 count=\$bytes ; } 2> /dev/null
+}
+
+MS_Help()
+{
+ cat << EOH >&2
+Makeself version $MS_VERSION
+ 1) Getting help or info about \$0 :
+ \$0 --help Print this message
+ \$0 --info Print embedded info : title, default target directory, embedded script ...
+ \$0 --lsm Print embedded lsm entry (or no LSM)
+ \$0 --list Print the list of files in the archive
+ \$0 --check Checks integrity of the archive
+
+ 2) Running \$0 :
+ \$0 [options] [--] [additional arguments to embedded script]
+ with following options (in that order)
+ --confirm Ask before running embedded script
+ --noexec Do not run embedded script
+ --keep Do not erase target directory after running
+ the embedded script
+ --nox11 Do not spawn an xterm
+ --nochown Do not give the extracted files to the current user
+ --target NewDirectory Extract in NewDirectory
+ --tar arg1 [arg2 ...] Access the contents of the archive through the tar command
+ -- Following arguments will be passed to the embedded script
+EOH
+}
+
+MS_Check()
+{
+ OLD_PATH="\$PATH"
+ PATH=\${GUESS_MD5_PATH:-"\$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"}
+ MD5_ARG=""
+ MD5_PATH=\`exec <&- 2>&-; which md5sum || type md5sum\`
+ test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which md5 || type md5\`
+ test -x "\$MD5_PATH" || MD5_PATH=\`exec <&- 2>&-; which digest || type digest\`
+ PATH="\$OLD_PATH"
+
+ MS_Printf "Verifying archive integrity..."
+ offset=\`head -n $SKIP "\$1" | wc -c | tr -d " "\`
+ verb=\$2
+ i=1
+ for s in \$filesizes
+ do
+ crc=\`echo \$CRCsum | cut -d" " -f\$i\`
+ if test -x "\$MD5_PATH"; then
+ if test \`basename \$MD5_PATH\` = digest; then
+ MD5_ARG="-a md5"
+ fi
+ md5=\`echo \$MD5 | cut -d" " -f\$i\`
+ if test \$md5 = "00000000000000000000000000000000"; then
+ test x\$verb = xy && echo " \$1 does not contain an embedded MD5 checksum." >&2
+ else
+ md5sum=\`MS_dd "\$1" \$offset \$s | eval "\$MD5_PATH \$MD5_ARG" | cut -b-32\`;
+ if test "\$md5sum" != "\$md5"; then
+ echo "Error in MD5 checksums: \$md5sum is different from \$md5" >&2
+ exit 2
+ else
+ test x\$verb = xy && MS_Printf " MD5 checksums are OK." >&2
+ fi
+ crc="0000000000"; verb=n
+ fi
+ fi
+ if test \$crc = "0000000000"; then
+ test x\$verb = xy && echo " \$1 does not contain a CRC checksum." >&2
+ else
+ sum1=\`MS_dd "\$1" \$offset \$s | CMD_ENV=xpg4 cksum | awk '{print \$1}'\`
+ if test "\$sum1" = "\$crc"; then
+ test x\$verb = xy && MS_Printf " CRC checksums are OK." >&2
+ else
+ echo "Error in checksums: \$sum1 is different from \$crc"
+ exit 2;
+ fi
+ fi
+ i=\`expr \$i + 1\`
+ offset=\`expr \$offset + \$s\`
+ done
+ echo " All good."
+}
+
+UnTAR()
+{
+ tar \$1vf - 2>&1 || { echo Extraction failed. > /dev/tty; kill -15 \$$; }
+}
+
+finish=true
+xterm_loop=
+nox11=$NOX11
+copy=$COPY
+ownership=y
+verbose=n
+
+initargs="\$@"
+
+while true
+do
+ case "\$1" in
+ -h | --help)
+ MS_Help
+ exit 0
+ ;;
+ --info)
+ echo Identification: "\$label"
+ echo Target directory: "\$targetdir"
+ echo Uncompressed size: $USIZE KB
+ echo Compression: $COMPRESS
+ echo Date of packaging: $DATE
+ echo Built with Makeself version $MS_VERSION on $OSTYPE
+ echo Build command was: "$MS_COMMAND"
+ if test x\$script != x; then
+ echo Script run after extraction:
+ echo " " \$script \$scriptargs
+ fi
+ if test x"$copy" = xcopy; then
+ echo "Archive will copy itself to a temporary location"
+ fi
+ if test x"$KEEP" = xy; then
+ echo "directory \$targetdir is permanent"
+ else
+ echo "\$targetdir will be removed after extraction"
+ fi
+ exit 0
+ ;;
+ --dumpconf)
+ echo LABEL=\"\$label\"
+ echo SCRIPT=\"\$script\"
+ echo SCRIPTARGS=\"\$scriptargs\"
+ echo archdirname=\"$archdirname\"
+ echo KEEP=$KEEP
+ echo COMPRESS=$COMPRESS
+ echo filesizes=\"\$filesizes\"
+ echo CRCsum=\"\$CRCsum\"
+ echo MD5sum=\"\$MD5\"
+ echo OLDUSIZE=$USIZE
+ echo OLDSKIP=`expr $SKIP + 1`
+ exit 0
+ ;;
+ --lsm)
+cat << EOLSM
+EOF
+eval "$LSM_CMD"
+cat << EOF >> "$archname"
+EOLSM
+ exit 0
+ ;;
+ --list)
+ echo Target directory: \$targetdir
+ offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+ for s in \$filesizes
+ do
+ MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | UnTAR t
+ offset=\`expr \$offset + \$s\`
+ done
+ exit 0
+ ;;
+ --tar)
+ offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+ arg1="\$2"
+ shift 2
+ for s in \$filesizes
+ do
+ MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | tar "\$arg1" - \$*
+ offset=\`expr \$offset + \$s\`
+ done
+ exit 0
+ ;;
+ --check)
+ MS_Check "\$0" y
+ exit 0
+ ;;
+ --confirm)
+ verbose=y
+ shift
+ ;;
+ --noexec)
+ script=""
+ shift
+ ;;
+ --keep)
+ keep=y
+ shift
+ ;;
+ --target)
+ keep=y
+ targetdir=\${2:-.}
+ shift 2
+ ;;
+ --nox11)
+ nox11=y
+ shift
+ ;;
+ --nochown)
+ ownership=n
+ shift
+ ;;
+ --xwin)
+ finish="echo Press Return to close this window...; read junk"
+ xterm_loop=1
+ shift
+ ;;
+ --phase2)
+ copy=phase2
+ shift
+ ;;
+ --)
+ shift
+ break ;;
+ -*)
+ echo Unrecognized flag : "\$1" >&2
+ MS_Help
+ exit 1
+ ;;
+ *)
+ break ;;
+ esac
+done
+
+case "\$copy" in
+copy)
+ tmpdir=\$TMPROOT/makeself.\$RANDOM.\`date +"%y%m%d%H%M%S"\`.\$\$
+ mkdir "\$tmpdir" || {
+ echo "Could not create temporary directory \$tmpdir" >&2
+ exit 1
+ }
+ SCRIPT_COPY="\$tmpdir/makeself"
+ echo "Copying to a temporary location..." >&2
+ cp "\$0" "\$SCRIPT_COPY"
+ chmod +x "\$SCRIPT_COPY"
+ cd "\$TMPROOT"
+ exec "\$SCRIPT_COPY" --phase2 -- \$initargs
+ ;;
+phase2)
+ finish="\$finish ; rm -rf \`dirname \$0\`"
+ ;;
+esac
+
+if test "\$nox11" = "n"; then
+ if tty -s; then # Do we have a terminal?
+ :
+ else
+ if test x"\$DISPLAY" != x -a x"\$xterm_loop" = x; then # No, but do we have X?
+ if xset q > /dev/null 2>&1; then # Check for valid DISPLAY variable
+ GUESS_XTERMS="xterm rxvt dtterm eterm Eterm kvt konsole aterm"
+ for a in \$GUESS_XTERMS; do
+ if type \$a >/dev/null 2>&1; then
+ XTERM=\$a
+ break
+ fi
+ done
+ chmod a+x \$0 || echo Please add execution rights on \$0
+ if test \`echo "\$0" | cut -c1\` = "/"; then # Spawn a terminal!
+ exec \$XTERM -title "\$label" -e "\$0" --xwin "\$initargs"
+ else
+ exec \$XTERM -title "\$label" -e "./\$0" --xwin "\$initargs"
+ fi
+ fi
+ fi
+ fi
+fi
+
+if test "\$targetdir" = "."; then
+ tmpdir="."
+else
+ if test "\$keep" = y; then
+ echo "Creating directory \$targetdir" >&2
+ tmpdir="\$targetdir"
+ dashp="-p"
+ else
+ tmpdir="\$TMPROOT/selfgz\$\$\$RANDOM"
+ dashp=""
+ fi
+ mkdir \$dashp \$tmpdir || {
+ echo 'Cannot create target directory' \$tmpdir >&2
+ echo 'You should try option --target OtherDirectory' >&2
+ eval \$finish
+ exit 1
+ }
+fi
+
+location="\`pwd\`"
+if test x\$SETUP_NOCHECK != x1; then
+ MS_Check "\$0"
+fi
+offset=\`head -n $SKIP "\$0" | wc -c | tr -d " "\`
+
+if test x"\$verbose" = xy; then
+ MS_Printf "About to extract $USIZE KB in \$tmpdir ... Proceed ? [Y/n] "
+ read yn
+ if test x"\$yn" = xn; then
+ eval \$finish; exit 1
+ fi
+fi
+
+MS_Printf "Uncompressing \$label"
+res=3
+if test "\$keep" = n; then
+ trap 'echo Signal caught, cleaning up >&2; cd \$TMPROOT; /bin/rm -rf \$tmpdir; eval \$finish; exit 15' 1 2 3 15
+fi
+
+leftspace=\`MS_diskspace \$tmpdir\`
+if test \$leftspace -lt $USIZE; then
+ echo
+ echo "Not enough space left in "\`dirname \$tmpdir\`" (\$leftspace KB) to decompress \$0 ($USIZE KB)" >&2
+ if test "\$keep" = n; then
+ echo "Consider setting TMPDIR to a directory with more free space."
+ fi
+ eval \$finish; exit 1
+fi
+
+for s in \$filesizes
+do
+ if MS_dd "\$0" \$offset \$s | eval "$GUNZIP_CMD" | ( cd "\$tmpdir"; UnTAR x ) | MS_Progress; then
+ if test x"\$ownership" = xy; then
+ (PATH=/usr/xpg4/bin:\$PATH; cd "\$tmpdir"; chown -R \`id -u\` .; chgrp -R \`id -g\` .)
+ fi
+ else
+ echo
+ echo "Unable to decompress \$0" >&2
+ eval \$finish; exit 1
+ fi
+ offset=\`expr \$offset + \$s\`
+done
+echo
+
+cd "\$tmpdir"
+res=0
+if test x"\$script" != x; then
+ if test x"\$verbose" = xy; then
+ MS_Printf "OK to execute: \$script \$scriptargs \$* ? [Y/n] "
+ read yn
+ if test x"\$yn" = x -o x"\$yn" = xy -o x"\$yn" = xY; then
+ eval \$script \$scriptargs \$*; res=\$?;
+ fi
+ else
+ eval \$script \$scriptargs \$*; res=\$?
+ fi
+ if test \$res -ne 0; then
+ test x"\$verbose" = xy && echo "The program '\$script' returned an error code (\$res)" >&2
+ fi
+fi
+if test "\$keep" = n; then
+ cd \$TMPROOT
+ /bin/rm -rf \$tmpdir
+fi
+eval \$finish; exit \$res
+EOF
+ ./makeself-2.1.5/.svn/text-base/makeself.1.svn-base 0000444 0001750 0001750 00000003427 11261350671 020645 0 ustar mattm mattm .TH "makeself" "1" "2.1.4"
+.SH "NAME"
+makeself \- An utility to generate self-extractable archives.
+.SH "SYNTAX"
+.LP
+.B makeself [\fIoptions\fP] archive_dir file_name label
+.B [\fIstartup_script\fP] [\fIargs\fP]
+.SH "DESCRIPTION"
+.LP
+This program is a free (GPL) utility designed to create self-extractable
+archives from a directory.
+.br
+.SH "OPTIONS"
+.LP
+The following options are supported.
+.LP
+.TP 15
+.B -v, --version
+Prints out the makeself version number and exits.
+.TP
+.B -h, --help
+Print out help information.
+.TP
+.B --gzip
+Compress using gzip (default if detected).
+.TP
+.B --bzip2
+Compress using bzip2.
+.TP
+.B --compress
+Compress using the UNIX 'compress' command.
+.TP
+.B --nocomp
+Do not compress the data.
+.TP
+.B --notemp
+The archive will create archive_dir in the current directory and
+uncompress in ./archive_dir.
+.TP
+.B --copy
+Upon extraction, the archive will first copy itself to a temporary directory.
+.TP
+.B --append
+Append more files to an existing makeself archive.
+The label and startup scripts will then be ignored.
+.TP
+.B --current
+Files will be extracted to the current directory. Implies --notemp.
+.TP
+.B --header file
+Specify location of the header script.
+.TP
+.B --follow
+Follow the symlinks in the archive.
+.TP
+.B --nox11
+Disable automatic spawn of an xterm if running in X11.
+.TP
+.B --nowait
+Do not wait for user input after executing embedded program from an xterm.
+.TP
+.B --nomd5
+Do not create a MD5 checksum for the archive.
+.TP
+.B --nocrc
+Do not create a CRC32 checksum for the archive.
+.TP
+.B --lsm file
+LSM file describing the package.
+.PD
+.SH "AUTHORS"
+.LP
+Makeself has been written by Stéphane Peter <megastep at megastep.org>.
+.BR
+This man page was originally written by Bartosz Fenski <fenio at o2.pl> for the
+Debian GNU/Linux distribution (but it may be used by others).
+ ./makeself-2.1.5/.svn/text-base/makeself.sh.svn-base 0000444 0001750 0001750 00000027223 11261350671 021117 0 ustar mattm mattm #!/bin/sh
+#
+# Makeself version 2.1.x
+# by Stephane Peter <megastep at megastep.org>
+#
+# $Id: makeself.sh,v 1.64 2008/01/04 23:52:14 megastep Exp $
+#
+# Utility to create self-extracting tar.gz archives.
+# The resulting archive is a file holding the tar.gz archive with
+# a small Shell script stub that uncompresses the archive to a temporary
+# directory and then executes a given script from withing that directory.
+#
+# Makeself home page: http://www.megastep.org/makeself/
+#
+# Version 2.0 is a rewrite of version 1.0 to make the code easier to read and maintain.
+#
+# Version history :
+# - 1.0 : Initial public release
+# - 1.1 : The archive can be passed parameters that will be passed on to
+# the embedded script, thanks to John C. Quillan
+# - 1.2 : Package distribution, bzip2 compression, more command line options,
+# support for non-temporary archives. Ideas thanks to Francois Petitjean
+# - 1.3 : More patches from Bjarni R. Einarsson and Francois Petitjean:
+# Support for no compression (--nocomp), script is no longer mandatory,
+# automatic launch in an xterm, optional verbose output, and -target
+# archive option to indicate where to extract the files.
+# - 1.4 : Improved UNIX compatibility (Francois Petitjean)
+# Automatic integrity checking, support of LSM files (Francois Petitjean)
+# - 1.5 : Many bugfixes. Optionally disable xterm spawning.
+# - 1.5.1 : More bugfixes, added archive options -list and -check.
+# - 1.5.2 : Cosmetic changes to inform the user of what's going on with big
+# archives (Quake III demo)
+# - 1.5.3 : Check for validity of the DISPLAY variable before launching an xterm.
+# More verbosity in xterms and check for embedded command's return value.
+# Bugfix for Debian 2.0 systems that have a different "print" command.
+# - 1.5.4 : Many bugfixes. Print out a message if the extraction failed.
+# - 1.5.5 : More bugfixes. Added support for SETUP_NOCHECK environment variable to
+# bypass checksum verification of archives.
+# - 1.6.0 : Compute MD5 checksums with the md5sum command (patch from Ryan Gordon)
+# - 2.0 : Brand new rewrite, cleaner architecture, separated header and UNIX ports.
+# - 2.0.1 : Added --copy
+# - 2.1.0 : Allow multiple tarballs to be stored in one archive, and incremental updates.
+# Added --nochown for archives
+# Stopped doing redundant checksums when not necesary
+# - 2.1.1 : Work around insane behavior from certain Linux distros with no 'uncompress' command
+# Cleaned up the code to handle error codes from compress. Simplified the extraction code.
+# - 2.1.2 : Some bug fixes. Use head -n to avoid problems.
+# - 2.1.3 : Bug fixes with command line when spawning terminals.
+# Added --tar for archives, allowing to give arbitrary arguments to tar on the contents of the archive.
+# Added --noexec to prevent execution of embedded scripts.
+# Added --nomd5 and --nocrc to avoid creating checksums in archives.
+# Added command used to create the archive in --info output.
+# Run the embedded script through eval.
+# - 2.1.4 : Fixed --info output.
+# Generate random directory name when extracting files to . to avoid problems. (Jason Trent)
+# Better handling of errors with wrong permissions for the directory containing the files. (Jason Trent)
+# Avoid some race conditions (Ludwig Nussel)
+# Unset the $CDPATH variable to avoid problems if it is set. (Debian)
+# Better handling of dot files in the archive directory.
+# - 2.1.5 : Made the md5sum detection consistent with the header code.
+# Check for the presence of the archive directory
+# Added --encrypt for symmetric encryption through gpg (Eric Windisch)
+# Added support for the digest command on Solaris 10 for MD5 checksums
+# Check for available disk space before extracting to the target directory (Andreas Schweitzer)
+# Allow extraction to run asynchronously (patch by Peter Hatch)
+# Use file descriptors internally to avoid error messages (patch by Kay Tiong Khoo)
+#
+# (C) 1998-2008 by Stéphane Peter <megastep at megastep.org>
+#
+# This software is released under the terms of the GNU GPL version 2 and above
+# Please read the license at http://www.gnu.org/copyleft/gpl.html
+#
+
+MS_VERSION=2.1.5
+MS_COMMAND="$0"
+unset CDPATH
+
+for f in "${1+"$@"}"; do
+ MS_COMMAND="$MS_COMMAND \\\\
+ \\\"$f\\\""
+done
+
+# Procedures
+
+MS_Usage()
+{
+ echo "Usage: $0 [params] archive_dir file_name label [startup_script] [args]"
+ echo "params can be one or more of the following :"
+ echo " --version | -v : Print out Makeself version number and exit"
+ echo " --help | -h : Print out this help message"
+ echo " --gzip : Compress using gzip (default if detected)"
+ echo " --bzip2 : Compress using bzip2 instead of gzip"
+ echo " --compress : Compress using the UNIX 'compress' command"
+ echo " --nocomp : Do not compress the data"
+ echo " --notemp : The archive will create archive_dir in the"
+ echo " current directory and uncompress in ./archive_dir"
+ echo " --copy : Upon extraction, the archive will first copy itself to"
+ echo " a temporary directory"
+ echo " --append : Append more files to an existing Makeself archive"
+ echo " The label and startup scripts will then be ignored"
+ echo " --current : Files will be extracted to the current directory."
+ echo " Implies --notemp."
+ echo " --nomd5 : Don't calculate an MD5 for archive"
+ echo " --nocrc : Don't calculate a CRC for archive"
+ echo " --header file : Specify location of the header script"
+ echo " --follow : Follow the symlinks in the archive"
+ echo " --nox11 : Disable automatic spawn of a xterm"
+ echo " --nowait : Do not wait for user input after executing embedded"
+ echo " program from an xterm"
+ echo " --lsm file : LSM file describing the package"
+ echo
+ echo "Do not forget to give a fully qualified startup script name"
+ echo "(i.e. with a ./ prefix if inside the archive)."
+ exit 1
+}
+
+# Default settings
+if type gzip 2>&1 > /dev/null; then
+ COMPRESS=gzip
+else
+ COMPRESS=Unix
+fi
+KEEP=n
+CURRENT=n
+NOX11=n
+APPEND=n
+COPY=none
+TAR_ARGS=cvf
+HEADER=`dirname $0`/makeself-header.sh
+
+# LSM file stuff
+LSM_CMD="echo No LSM. >> \"\$archname\""
+
+while true
+do
+ case "$1" in
+ --version | -v)
+ echo Makeself version $MS_VERSION
+ exit 0
+ ;;
+ --bzip2)
+ COMPRESS=bzip2
+ shift
+ ;;
+ --gzip)
+ COMPRESS=gzip
+ shift
+ ;;
+ --compress)
+ COMPRESS=Unix
+ shift
+ ;;
+ --encrypt)
+ COMPRESS=gpg
+ shift
+ ;;
+ --nocomp)
+ COMPRESS=none
+ shift
+ ;;
+ --notemp)
+ KEEP=y
+ shift
+ ;;
+ --copy)
+ COPY=copy
+ shift
+ ;;
+ --current)
+ CURRENT=y
+ KEEP=y
+ shift
+ ;;
+ --header)
+ HEADER="$2"
+ shift 2
+ ;;
+ --follow)
+ TAR_ARGS=cvfh
+ shift
+ ;;
+ --nox11)
+ NOX11=y
+ shift
+ ;;
+ --nowait)
+ shift
+ ;;
+ --nomd5)
+ NOMD5=y
+ shift
+ ;;
+ --nocrc)
+ NOCRC=y
+ shift
+ ;;
+ --append)
+ APPEND=y
+ shift
+ ;;
+ --lsm)
+ LSM_CMD="cat \"$2\" >> \"\$archname\""
+ shift 2
+ ;;
+ -h | --help)
+ MS_Usage
+ ;;
+ -*)
+ echo Unrecognized flag : "$1"
+ MS_Usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+done
+
+if test $# -lt 1; then
+ MS_Usage
+else
+ if test -d "$1"; then
+ archdir="$1"
+ else
+ echo "Directory $1 does not exist."
+ exit 1
+ fi
+fi
+archname="$2"
+
+if test "$APPEND" = y; then
+ if test $# -lt 2; then
+ MS_Usage
+ fi
+
+ # Gather the info from the original archive
+ OLDENV=`sh "$archname" --dumpconf`
+ if test $? -ne 0; then
+ echo "Unable to update archive: $archname" >&2
+ exit 1
+ else
+ eval "$OLDENV"
+ fi
+else
+ if test "$KEEP" = n -a $# = 3; then
+ echo "ERROR: Making a temporary archive with no embedded command does not make sense!" >&2
+ echo
+ MS_Usage
+ fi
+ # We don't really want to create an absolute directory...
+ if test "$CURRENT" = y; then
+ archdirname="."
+ else
+ archdirname=`basename "$1"`
+ fi
+
+ if test $# -lt 3; then
+ MS_Usage
+ fi
+
+ LABEL="$3"
+ SCRIPT="$4"
+ test x$SCRIPT = x || shift 1
+ shift 3
+ SCRIPTARGS="$*"
+fi
+
+if test "$KEEP" = n -a "$CURRENT" = y; then
+ echo "ERROR: It is A VERY DANGEROUS IDEA to try to combine --notemp and --current." >&2
+ exit 1
+fi
+
+case $COMPRESS in
+gzip)
+ GZIP_CMD="gzip -c9"
+ GUNZIP_CMD="gzip -cd"
+ ;;
+bzip2)
+ GZIP_CMD="bzip2 -9"
+ GUNZIP_CMD="bzip2 -d"
+ ;;
+gpg)
+ GZIP_CMD="gpg -ac -z9"
+ GUNZIP_CMD="gpg -d"
+ ;;
+Unix)
+ GZIP_CMD="compress -cf"
+ GUNZIP_CMD="exec 2>&-; uncompress -c || test \\\$? -eq 2 || gzip -cd"
+ ;;
+none)
+ GZIP_CMD="cat"
+ GUNZIP_CMD="cat"
+ ;;
+esac
+
+tmpfile="${TMPDIR:=/tmp}/mkself$$"
+
+if test -f $HEADER; then
+ oldarchname="$archname"
+ archname="$tmpfile"
+ # Generate a fake header to count its lines
+ SKIP=0
+ . $HEADER
+ SKIP=`cat "$tmpfile" |wc -l`
+ # Get rid of any spaces
+ SKIP=`expr $SKIP`
+ rm -f "$tmpfile"
+ echo Header is $SKIP lines long >&2
+
+ archname="$oldarchname"
+else
+ echo "Unable to open header file: $HEADER" >&2
+ exit 1
+fi
+
+echo
+
+if test "$APPEND" = n; then
+ if test -f "$archname"; then
+ echo "WARNING: Overwriting existing file: $archname" >&2
+ fi
+fi
+
+USIZE=`du -ks $archdir | cut -f1`
+DATE=`LC_ALL=C date`
+
+if test "." = "$archdirname"; then
+ if test "$KEEP" = n; then
+ archdirname="makeself-$$-`date +%Y%m%d%H%M%S`"
+ fi
+fi
+
+test -d "$archdir" || { echo "Error: $archdir does not exist."; rm -f "$tmpfile"; exit 1; }
+echo About to compress $USIZE KB of data...
+echo Adding files to archive named \"$archname\"...
+exec 3<> "$tmpfile"
+(cd "$archdir" && ( tar $TAR_ARGS - . | eval "$GZIP_CMD" >&3 ) ) || { echo Aborting: Archive directory not found or temporary file: "$tmpfile" could not be created.; exec 3>&-; rm -f "$tmpfile"; exit 1; }
+exec 3>&- # try to close the archive
+
+fsize=`cat "$tmpfile" | wc -c | tr -d " "`
+
+# Compute the checksums
+
+md5sum=00000000000000000000000000000000
+crcsum=0000000000
+
+if test "$NOCRC" = y; then
+ echo "skipping crc at user request"
+else
+ crcsum=`cat "$tmpfile" | CMD_ENV=xpg4 cksum | sed -e 's/ /Z/' -e 's/ /Z/' | cut -dZ -f1`
+ echo "CRC: $crcsum"
+fi
+
+if test "$NOMD5" = y; then
+ echo "skipping md5sum at user request"
+else
+ # Try to locate a MD5 binary
+ OLD_PATH=$PATH
+ PATH=${GUESS_MD5_PATH:-"$OLD_PATH:/bin:/usr/bin:/sbin:/usr/local/ssl/bin:/usr/local/bin:/opt/openssl/bin"}
+ MD5_ARG=""
+ MD5_PATH=`exec <&- 2>&-; which md5sum || type md5sum`
+ test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which md5 || type md5`
+ test -x $MD5_PATH || MD5_PATH=`exec <&- 2>&-; which digest || type digest`
+ PATH=$OLD_PATH
+ if test `basename $MD5_PATH` = digest; then
+ MD5_ARG="-a md5"
+ fi
+ if test -x "$MD5_PATH"; then
+ md5sum=`cat "$tmpfile" | eval "$MD5_PATH $MD5_ARG" | cut -b-32`;
+ echo "MD5: $md5sum"
+ else
+ echo "MD5: none, MD5 command not found"
+ fi
+fi
+
+if test "$APPEND" = y; then
+ mv "$archname" "$archname".bak || exit
+
+ # Prepare entry for new archive
+ filesizes="$filesizes $fsize"
+ CRCsum="$CRCsum $crcsum"
+ MD5sum="$MD5sum $md5sum"
+ USIZE=`expr $USIZE + $OLDUSIZE`
+ # Generate the header
+ . $HEADER
+ # Append the original data
+ tail -n +$OLDSKIP "$archname".bak >> "$archname"
+ # Append the new data
+ cat "$tmpfile" >> "$archname"
+
+ chmod +x "$archname"
+ rm -f "$archname".bak
+ echo Self-extractible archive \"$archname\" successfully updated.
+else
+ filesizes="$fsize"
+ CRCsum="$crcsum"
+ MD5sum="$md5sum"
+
+ # Generate the header
+ . $HEADER
+
+ # Append the compressed tar data after the stub
+ echo
+ cat "$tmpfile" >> "$archname"
+ chmod +x "$archname"
+ echo Self-extractible archive \"$archname\" successfully created.
+fi
+rm -f "$tmpfile"
+ ./makeself-2.1.5/.svn/text-base/makeself.lsm.svn-base 0000444 0001750 0001750 00000001477 11261350671 021303 0 ustar mattm mattm Begin3
+Title: makeself.sh
+Version: 2.1
+Description: makeself.sh is a shell script that generates a self-extractable
+ tar.gz archive from a directory. The resulting file appears as a shell
+ script, and can be launched as is. The archive will then uncompress
+ itself to a temporary directory and an arbitrary command will be
+ executed (for example an installation script). This is pretty similar
+ to archives generated with WinZip Self-Extractor in the Windows world.
+Keywords: Installation archive tar winzip
+Author: Stéphane Peter (megastep at megastep.org)
+Maintained-by: Stéphane Peter (megastep at megastep.org)
+Original-site: http://www.megastep.org/makeself/
+Platform: Unix
+Copying-policy: GPL
+End
+ ./makeself-2.1.5/.svn/text-base/COPYING.svn-base 0000444 0001750 0001750 00000043130 11261350671 020022 0 ustar mattm mattm
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+ ./makeself-2.1.5/makeself.1 0000666 0001750 0001750 00000003427 11261350671 014356 0 ustar mattm mattm .TH "makeself" "1" "2.1.4"
+.SH "NAME"
+makeself \- An utility to generate self-extractable archives.
+.SH "SYNTAX"
+.LP
+.B makeself [\fIoptions\fP] archive_dir file_name label
+.B [\fIstartup_script\fP] [\fIargs\fP]
+.SH "DESCRIPTION"
+.LP
+This program is a free (GPL) utility designed to create self-extractable
+archives from a directory.
+.br
+.SH "OPTIONS"
+.LP
+The following options are supported.
+.LP
+.TP 15
+.B -v, --version
+Prints out the makeself version number and exits.
+.TP
+.B -h, --help
+Print out help information.
+.TP
+.B --gzip
+Compress using gzip (default if detected).
+.TP
+.B --bzip2
+Compress using bzip2.
+.TP
+.B --compress
+Compress using the UNIX 'compress' command.
+.TP
+.B --nocomp
+Do not compress the data.
+.TP
+.B --notemp
+The archive will create archive_dir in the current directory and
+uncompress in ./archive_dir.
+.TP
+.B --copy
+Upon extraction, the archive will first copy itself to a temporary directory.
+.TP
+.B --append
+Append more files to an existing makeself archive.
+The label and startup scripts will then be ignored.
+.TP
+.B --current
+Files will be extracted to the current directory. Implies --notemp.
+.TP
+.B --header file
+Specify location of the header script.
+.TP
+.B --follow
+Follow the symlinks in the archive.
+.TP
+.B --nox11
+Disable automatic spawn of an xterm if running in X11.
+.TP
+.B --nowait
+Do not wait for user input after executing embedded program from an xterm.
+.TP
+.B --nomd5
+Do not create a MD5 checksum for the archive.
+.TP
+.B --nocrc
+Do not create a CRC32 checksum for the archive.
+.TP
+.B --lsm file
+LSM file describing the package.
+.PD
+.SH "AUTHORS"
+.LP
+Makeself has been written by Stéphane Peter <megastep at megastep.org>.
+.BR
+This man page was originally written by Bartosz Fenski <fenio at o2.pl> for the
+Debian GNU/Linux distribution (but it may be used by others).
+ ./makeself-2.1.5/COPYING 0000666 0001750 0001750 00000043130 11261350671 013533 0 ustar mattm mattm
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) 19yy <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
+ ./Changelog 0000666 0001750 0001750 00000003603 11261353406 012062 0 ustar mattm mattm 2009-10-02 Matthew Mundell <matthew.mundell at intevation.de>
+
+ * MANIFEST: Add newline at end of file.
+
+2009-10-02 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ Fixed a bug. Output of ls differs in ordering depending on the locale.
+ In the Makefile, the diff command compares ls output with MANIFEST,
+ leading to wrong results if these files are sorted differently.
+ Found in cooperation with Matthew Mundell.
+
+ * MANIFEST: Sorted "traditionally".
+
+ * Makefile: Set locale to have the ls command sort "traditionally".
+
+2009-09-23 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ * create-rpm.sh: Fixed bashism.
+
+2009-05-06 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ * openvas-lsc-target.spec.in: Delete user when package is uninstalled.
+
+ * TODO: Todos added (what happens if user exists, expire- date?).
+
+2009-04-24 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ * README: Corrected words about suggested invocation.
+
+ * create-rpm.sh: Removed three parameter version. If the
+ makeself-generated script is called exactly as described in the README
+ it is not needed, argument count will be 1 and not 3.
+
+2009-04-24 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ * README: Added words about suggested invocation.
+
+ * TODO: Need to remove the user when package is uninstalled.
+
+2009-04-24 Felix Wolfsteller <felix.wolfsteller at intevation.de>
+
+ * create-rpm.sh: Check number of arguments. Condition cleanup and
+ location of created rpm on number of arguments.
+
+2009-02-18 Jan-Oliver Wagner <jan-oliver.wagner at intevation.de>
+
+ * PUBKEYNAME, lsc-pubkey.pub: reset (removed test content).
+
+2009-02-17 Jan-Oliver Wagner <jan-oliver.wagner at intevation.de>
+
+ * README: Fixed directives.
+
+ * MANIFEST: Added missing entry for TODO.
+
+2009-02-17 Jan-Oliver Wagner <jan-oliver.wagner at intevation.de>
+
+ Started module. Most works so far are developed by
+ Jochen Plumeyer <jochen at plumeyer.org>
+ ./VERSION 0000666 0001750 0001750 00000000004 11261350671 011311 0 ustar mattm mattm 0.5
+ ./RPMBASENAME 0000666 0001750 0001750 00000000023 11261350671 011717 0 ustar mattm mattm openvas-lsc-target
+
\ No newline at end of file
Property changes on: trunk/openvas-libraries/tools/openvas-lsc-rpm-creator.sh
___________________________________________________________________
Name: svn:executable
+ *
More information about the Openvas-commits
mailing list