September 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Sep 1 10:46:14 CEST 2014
Ending: Tue Sep 30 15:18:40 CEST 2014
Messages: 330

• dive4elements/river at 8171: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] Handle missing years in bed height differences without assuming an unknown year to be BC 1   Wald Commits
  • [PATCH 2 of 3] Do not handle the impossible   Wald Commits
  • [PATCH 3 of 3] Broken -> broke away   Wald Commits
• dive4elements/river at 8172: new changeset   Wald Commits
  • [PATCH] Fix fraction respectively facet names and descriptions   Wald Commits
• dive4elements/river at 8173: new changeset   Wald Commits
  • [PATCH] Only calculated sums of fractions should be initially shown in diagram   Wald Commits
• dive4elements/river at 8174: new changeset   Wald Commits
  • [PATCH] Make sedimentload loadable as old calculation   Wald Commits
• dive4elements/river at 8175: new changeset   Wald Commits
  • [PATCH] Precalculated sums from the database will come through recommendations   Wald Commits
• dive4elements/river at 8176: new changeset   Wald Commits
  • [PATCH] Let epochs be averages over their years   Wald Commits
• dive4elements/river at 8177: new changeset   Wald Commits
  • [PATCH] We have to calculate bed load plus suspended sand instead of suspended load   Wald Commits
• dive4elements/river at 8178: new changeset   Wald Commits
  • [PATCH] Rev aa80f9ba56a9 was incomplete. Shame on me   Wald Commits
• dive4elements/river at 8179: new changeset   Wald Commits
  • [PATCH] Complete CSV-export and correct headers   Wald Commits
• dive4elements/river at 8180: new changeset   Wald Commits
  • [PATCH] The existing implementation respects the fact that months are 0-based   Wald Commits
• dive4elements/river at 8183: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] Added new processor to plot misc discharge data, e.g. from datacage or recommendations   Wald Commits
  • [PATCH 2 of 3] Changed discharge processor to plot only discharge curves and added processor for computed discharge curves   Wald Commits
  • [PATCH 3 of 3] merged   Wald Commits
• dive4elements/river at 8184: new changeset   Wald Commits
  • [PATCH] Remove dead class   Wald Commits
• dive4elements/river at 8185: new changeset   Wald Commits
  • [PATCH] Removed obsolete average and renamed some symbols to make the difference between single fractions and sums of them clearer in the calculation   Wald Commits
• dive4elements/river at 8186: new changeset   Wald Commits
  • [PATCH] Removed NASTY package clash. We had too org.dive4elements.river.util packages   Wald Commits
• dive4elements/river at 8187: new changeset   Wald Commits
  • [PATCH] Moved package org.dive4elements.river.utils to org.dive4elements.river.backend.utils   Wald Commits
• dive4elements/river at 8189: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Use processors for historical discharge curves   Wald Commits
  • [PATCH 2 of 2] merged   Wald Commits
• dive4elements/river at 8191: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Anti programming   Wald Commits
  • [PATCH 2 of 2] merged   Wald Commits
• dive4elements/river at 8192: new changeset   Wald Commits
  • [PATCH] Add Q'n'D Python script to find obsolete Java files   Wald Commits
• dive4elements/river at 8193: new changeset   Wald Commits
  • [PATCH] Sum up fractions from stations and previous stations according to respective validity model   Wald Commits
• dive4elements/river at 8194: new changeset   Wald Commits
  • [PATCH] Removed obsolete imports   Wald Commits
• dive4elements/river at 8195: new changeset   Wald Commits
  • [PATCH] Anti programming: Removed TIM parser which ist not needed any longer   Wald Commits
• dive4elements/river at 8196: new changeset   Wald Commits
  • [PATCH] Find obsolete Java files in more than one project hierachie   Wald Commits
• dive4elements/river at 8197: new changeset   Wald Commits
  • [PATCH] Anti programming: Removed obsolete classes in client. This may break stuff because of the GWT magic   Wald Commits
• dive4elements/river at 8198: new changeset   Wald Commits
  • [PATCH] Forget to adjust a string reference to a moved backend utils class   Wald Commits
• dive4elements/river at 8199: new changeset   Wald Commits
  • [PATCH] (issue1448) Add sq time intervals to sediment load data model   Wald Commits
• dive4elements/river at 8200: new changeset   Wald Commits
  • [PATCH] sed -i src/**/*.java 's/logger/log/g'   Wald Commits
• dive4elements/river at 8201: new changeset   Wald Commits
  • [PATCH] Make it compile again   Wald Commits
• dive4elements/river at 8202: new changeset   Wald Commits
  • [PATCH] sed src/**/*.java 's/logger/log/g'   Wald Commits
• dive4elements/river at 8203: new changeset   Wald Commits
  • [PATCH] sed 's/logger/log/g' src/**/*.java   Wald Commits
• dive4elements/river at 8204: new changeset   Wald Commits
  • [PATCH] Sediment loads at measurement stations and longitudinal sections need different processing and styling for diagrams   Wald Commits
• dive4elements/river at 8205: new changeset   Wald Commits
  • [PATCH] Do not return pure NaN data   Wald Commits
• dive4elements/river at 8206: new changeset   Wald Commits
  • [PATCH] Added processor for discharge curve in fixanalysis   Wald Commits
• dive4elements/river at 8207: new changeset   Wald Commits
  • [PATCH] Added new processor for fix derived curve   Wald Commits
• dive4elements/river at 8208: new changeset   Wald Commits
  • [PATCH] Sediment load: converted grain fraction name to an array lookup   Wald Commits
• dive4elements/river at 8209: new changeset   Wald Commits
  • [PATCH] Fixed broken build   Wald Commits
• dive4elements/river at 8210: new changeset   Wald Commits
  • [PATCH] (issue1448) Use left join to permit loads with empty sq_time intervals to be handled   Wald Commits
• dive4elements/river at 8212: 2 new changesets (2 on superdev)   Wald Commits
  • [PATCH 1 of 2] Update GWT to 2.6.1   Wald Commits
  • [PATCH 2 of 2] Do not inherit smartgwt include the javascript directly in FLYS.html   Wald Commits
• dive4elements/river at 8213: new changeset   Wald Commits
  • [PATCH] Error reports for sediment load calculation   Wald Commits
• dive4elements/river at 8214: new changeset   Wald Commits
  • [PATCH] Allow fractions without SQ-time interval (suspended sediment) to be loaded   Wald Commits
• dive4elements/river at 8215: new changeset   Wald Commits
  • [PATCH] Fetch missing values from database and show them in diagrams   Wald Commits
• dive4elements/river at 8216: new changeset   Wald Commits
  • [PATCH] We only need to know what's going on upstream   Wald Commits
• dive4elements/river at 8218: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Anti programming: Throw CrossSectionApp away. Not useful ATM. The backing data structures are fine now and the original purpose of the app was to figure them out   Wald Commits
  • [PATCH 2 of 2] Merged   Wald Commits
• dive4elements/framework at 529: new changeset   Wald Commits
  • [PATCH] Added new interface for call context injectors   Wald Commits
• dive4elements/river at 8219: new changeset   Wald Commits
  • [PATCH] Added context injector to generators   Wald Commits
• dive4elements/river at 8220: new changeset   Wald Commits
  • [PATCH] Stop stupid propagation of out subtype in generators. What is this? It is not used anyway   Wald Commits
• dive4elements/river at 8221: new changeset   Wald Commits
  • [PATCH] Call context inspector in output helper   Wald Commits
• dive4elements/river at 8222: new changeset   Wald Commits
  • [PATCH] Let official epochs be showy and remove detritus of 'yields' in datacage config   Wald Commits
• dive4elements/framework at 530: new changeset   Wald Commits
  • [PATCH] Added request document to call context injector   Wald Commits
• dive4elements/river at 8224: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Made it compile with changed ContextInjector interface again   Wald Commits
  • [PATCH 2 of 2] Merged   Wald Commits
• dive4elements/river at 8225: new changeset   Wald Commits
  • [PATCH] Pass request document to the context injectors   Wald Commits
• dive4elements/river at 8232: 7 new changesets   Wald Commits
  • [PATCH 1 of 7] (issue1448) Add SQ Time interval select state   Wald Commits
  • [PATCH 2 of 7] (issue1448) Add l10n for new sq time interval state   Wald Commits
  • [PATCH 3 of 7] (issue1448) Fix return values of SQ time interval accessors   Wald Commits
  • [PATCH 4 of 7] (issue1448) Extend SL info service to handle sq_time_intervals   Wald Commits
  • [PATCH 5 of 7] (issue1448) Extend SedimentLoadInfo request to handle sq time intervals   Wald Commits
  • [PATCH 6 of 7] (issue1448) Add Panel for new sq_ti_select state   Wald Commits
  • [PATCH 7 of 7] (issue1448) In a list of one element. Select the only element   Wald Commits
• dive4elements/river at 8234: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] (issue1448) Use correct data name for ti_id and carry string value of selected date   Wald Commits
  • [PATCH 2 of 2] (issue1448) Carry sq_ti_date in artifact description anf fix sqtipanel   Wald Commits
• dive4elements/river at 8235: new changeset   Wald Commits
  • [PATCH] (issue1448) Look through all the data for sq_ti_id in following states   Wald Commits
• dive4elements/river at 8238: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] (issue1448) Add Sq time interval to sediment load accessor   Wald Commits
  • [PATCH 2 of 3] (issue1448) Unify SedimentLoadData ctor again   Wald Commits
  • [PATCH 3 of 3] (issue1448) Finally use the sq time interval as filter in the calculation   Wald Commits
• dive4elements/river at 8240: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] (issue1448) Objectify sq_time_interval id   Wald Commits
  • [PATCH 2 of 2] (issue1448) Actually filter out not matching sq_time_interval_ids   Wald Commits
• dive4elements/river at 8241: new changeset   Wald Commits
  • [PATCH] Suggestion: Load official epochs via recommendations instead of a pseudo-calculation   Wald Commits
• dive4elements/river at 8242: new changeset   Wald Commits
  • [PATCH] (issue1448) Fix info service for epoch / periods and off epoch   Wald Commits
• dive4elements/river at 8243: new changeset   Wald Commits
  • [PATCH] Suggestion: sort measurement stations along the river and only along the river   Wald Commits
• dive4elements/river at 8244: new changeset   Wald Commits
  • [PATCH] We well want to average NaNs but want to know the cause of the result being NaN   Wald Commits
• dive4elements/river at 8245: new changeset   Wald Commits
  • [PATCH] Patch build from given date not available anymore   Wald Commits
• dive4elements/river at 8246: new changeset   Wald Commits
  • [PATCH] Enable dynamic zoom-range in subtitle   Wald Commits
• dive4elements/river at 8247: new changeset   Wald Commits
  • [PATCH] Some i18n completion in hist. discharge curves   Wald Commits
• dive4elements/river at 8248: new changeset   Wald Commits
  • [PATCH] Fix duration curve i18n   Wald Commits
• dive4elements/river at 8249: new changeset   Wald Commits
  • [PATCH] Write CSV-header only once   Wald Commits
• dive4elements/river at 8250: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.5 for changeset d81c4b0d5ca7   Wald Commits
• dive4elements/http-client at 108: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.5 for changeset b073fe246c2c   Wald Commits
• dive4elements/framework at 531: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.5 for changeset 7b8cf3da4f05   Wald Commits
• dive4elements/river at 8253: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] Added context injectors for discharge curves   Wald Commits
  • [PATCH 2 of 3] Added injectors to config and moved subtitle conf   Wald Commits
  • [PATCH 3 of 3] merged   Wald Commits
• dive4elements/river at 8254: new changeset   Wald Commits
  • [PATCH] Made call context injectors a list of comma separated classes   Wald Commits
• dive4elements/river at 8255: new changeset   Wald Commits
  • [PATCH] Removed obsolete imports   Wald Commits
• dive4elements/river at 8257: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Fixed date range panel in fix analysis   Wald Commits
  • [PATCH 2 of 2] merged   Wald Commits
• dive4elements/river at 8258: new changeset   Wald Commits
  • [PATCH] Suspended sand is part of total load   Wald Commits
• dive4elements/river at 8259: new changeset   Wald Commits
  • [PATCH] Measurement stations without range should not be used in calculation and we assume the beginning of the range is the station   Wald Commits
• dive4elements/river at 8260: new changeset   Wald Commits
  • [PATCH] Making i18n work was just easier using less wrappers in this case (issue1631)   Wald Commits
• dive4elements/river at 8262: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Fixed multi period panel in fix analysis   Wald Commits
  • [PATCH 2 of 2] Fixed location distance panel. TODO: Switch to location table and select tabs   Wald Commits
• dive4elements/river at 8263: new changeset   Wald Commits
  • [PATCH] Added discharge curve prototye   Wald Commits
• dive4elements/river at 8266: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] SQ relation overview is now a single chart containing all fractions   Wald Commits
  • [PATCH 2 of 3] Added themes for SQ relation overview chart   Wald Commits
  • [PATCH 3 of 3] merged   Wald Commits
• dive4elements/river at 8267: new changeset   Wald Commits
  • [PATCH] A bit less chaos in i18n for bed heights   Wald Commits
• dive4elements/river at 8268: new changeset   Wald Commits
  • [PATCH] Remove call of BfG-specific macro   Wald Commits
• dive4elements/river at 8269: new changeset   Wald Commits
  • [PATCH] Make use of publicly available external WMS (Pegelonline) otherwise called from BfG-specific macro   Wald Commits
• dive4elements/river at 8270: new changeset   Wald Commits
  • [PATCH] Call orphaned macro originating from 'fix_wq_curve' in prototype   Wald Commits
• dive4elements/river at 8271: new changeset   Wald Commits
  • [PATCH] Purge some duplicated logging an misleading comments   Wald Commits
• dive4elements/river at 8272: new changeset   Wald Commits
  • [PATCH] Adopt configuation of artifacts into new xml documents to make them configurable inline   Wald Commits
• dive4elements/river at 8273: new changeset   Wald Commits
  • [PATCH] Add metadata to bedheight facets in bed height differences   Wald Commits
• dive4elements/river at 8274: new changeset   Wald Commits
  • [PATCH] Set facet activity for bed quality   Wald Commits
• dive4elements/river at 8276: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] The default state is no more abstract   Wald Commits
  • [PATCH 2 of 2] merged   Wald Commits
• dive4elements/river at 8277: new changeset   Wald Commits
  • [PATCH] Update comment on conditional loading of user content   Wald Commits
• dive4elements/river at 8278: new changeset   Wald Commits
  • [PATCH] Crude script to find non-existant outs in meta-data.xml   Wald Commits
• dive4elements/river at 8279: new changeset   Wald Commits
  • [PATCH] Outs might be set in the client   Wald Commits
• dive4elements/river at 8283: 4 new changesets   Wald Commits
  • [PATCH 1 of 4] Added new fraction to sq relation   Wald Commits
  • [PATCH 2 of 4] Added themes for new fraction in sq relation   Wald Commits
  • [PATCH 3 of 4] Avoid NPE in discharge context injector if no start km was set   Wald Commits
  • [PATCH 4 of 4] merged   Wald Commits
• dive4elements/river at 8284: new changeset   Wald Commits
  • [PATCH] i18n is meant for translation and unfortunately the client has three files for that   Wald Commits
• dive4elements/river at 8286: 2 new changesets   Wald Commits
  • [PATCH 1 of 2] Fixed style for sq relation link in measurement station info grid   Wald Commits
  • [PATCH 2 of 2] merged   Wald Commits
• dive4elements/river at 8287: new changeset   Wald Commits
  • [PATCH] Avoid NPE if river is not accessible   Wald Commits
• dive4elements/river at 8288: new changeset   Wald Commits
  • [PATCH] Essentially backout rev 8ad0b7bc3e73 as this makes some SQ-relation curves appear buckled   Wald Commits
• dive4elements/river at 8289: new changeset   Wald Commits
  • [PATCH] Consider new SQ-diagrams in datacage config   Wald Commits
• dive4elements/river at 8290: new changeset   Wald Commits
  • [PATCH] In case the list is not ordered, in the end diagrams might look weird   Wald Commits
• dive4elements/river at 8291: new changeset   Wald Commits
  • [PATCH] Add theme for porosity and sync second with default   Wald Commits
• dive4elements/river at 8292: new changeset   Wald Commits
  • [PATCH] Set facet activity for middle bed height   Wald Commits
• dive4elements/river at 8293: new changeset   Wald Commits
  • [PATCH] Though not yet part of the calculation, suspended load has to be optionally loadable through datacage   Wald Commits
• dive4elements/river at 8294: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.6 for changeset 301a32bd7045   Wald Commits
• dive4elements/http-client at 109: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.6 for changeset 0d179b90920f   Wald Commits
• dive4elements/framework at 532: new changeset   Wald Commits
  • [PATCH] Added tag 3.1.6 for changeset 6431afaa13cc   Wald Commits
• dive4elements/river at 8295: new changeset   Wald Commits
  • [PATCH] At least since rev eb052d759fcc, there are no bed height epochs anymore   Wald Commits
• dive4elements/river at 8296: new changeset   Wald Commits
  • [PATCH] These meta-lines had been invented before   Wald Commits
• dive4elements/river at 8297: new changeset   Wald Commits
  • [PATCH] Official sedimentload epochs should be seperated from other data in datacage   Wald Commits
• dive4elements/river at 8298: new changeset   Wald Commits
  • [PATCH] Purge clash of out-names, resulting hacks and tests for not existing outs and give some more meaningful names   Wald Commits
• dive4elements/river at 8299: new changeset   Wald Commits
  • [PATCH] Classify and sort iteration over recommendations   Wald Commits
• dive4elements/river at 8300: new changeset   Wald Commits
  • [PATCH] Classify and sort iteration over non-recommendations   Wald Commits
• dive4elements/river at 8301: new changeset   Wald Commits
  • [PATCH] Classify and sort iteration over user-data non-recommendations   Wald Commits
• dive4elements/river at 8305: 4 new changesets   Wald Commits
  • [PATCH 1 of 4] Configured gauge discharge curve to use a default D4EArtifact and two states to hold the parameters and outs   Wald Commits
  • [PATCH 2 of 4] Updated the client to build a default artifact for gauge discharge curve   Wald Commits
  • [PATCH 3 of 4] Added injector for PNP   Wald Commits
  • [PATCH 4 of 4] merged   Wald Commits
• dive4elements/river at 8306: new changeset   Wald Commits
  • [PATCH] Remove duplications from discharge prototypes and put it all together   Wald Commits
• dive4elements/river at 8307: new changeset   Wald Commits
  • [PATCH] Put all macros for wst-data in one place and reduce code duplications   Wald Commits
• dive4elements/river at 8308: new changeset   Wald Commits
  • [PATCH] Q-symmetry: SQ-relations should not be filtered for specific outs (and optimised statement a bit)   Wald Commits
• dive4elements/river at 8309: new changeset   Wald Commits
  • [PATCH] Make WQ-data loadable in SQ-diagrams. We still need to handle mainvalues and values <=0 on x-axis   Wald Commits
• dive4elements/river at 8310: new changeset   Wald Commits
  • [PATCH] Make SQ-relations loadable in WQ-diagrams   Wald Commits
• dive4elements/river at 8314: 4 new changesets   Wald Commits
  • [PATCH 1 of 4] Renamed ui provider for static data panel   Wald Commits
  • [PATCH 2 of 4] Configured "static" sq relation to use a default D4EArtifact and two states to hold the parameters and outs   Wald Commits
  • [PATCH 3 of 4] Updated the client to build a default artifact for sq relations   Wald Commits
  • [PATCH 4 of 4] merged   Wald Commits
• dive4elements/river at 8315: new changeset   Wald Commits
  • [PATCH] Removed obsolete imports   Wald Commits
• dive4elements/river at 8316: new changeset   Wald Commits
  • [PATCH] Make ChartArea and thus annotations sensible for logarithmic axes (plus some minor cleanup)   Wald Commits
• dive4elements/river at 8317: new changeset   Wald Commits
  • [PATCH] Do not die if values <= 0 are tried to be plotted on log axis   Wald Commits
• dive4elements/river at 8318: new changeset   Wald Commits
  • [PATCH] And Developer said, Let there be Q symmetry and there was Q symmetry   Wald Commits
• dive4elements/river at 8319: new changeset   Wald Commits
  • [PATCH] Added PNP injectors to Q/X diagrams   Wald Commits
• dive4elements/river at 8320: new changeset   Wald Commits
  • [PATCH] Generate a W in CM axis if there are W data   Wald Commits
• dive4elements/river at 8321: new changeset   Wald Commits
  • [PATCH] Added missing l10n strings   Wald Commits
• dive4elements/river at 8322: new changeset   Wald Commits
  • [PATCH] Run native2ascii over FLYS*.properties   Wald Commits
• dive4elements/river at 8323: new changeset   Wald Commits
  • [PATCH] Use right logger in DischargeGenerator   Wald Commits
• dive4elements/river at 8324: new changeset   Wald Commits
  • [PATCH] Removed obsolete imports   Wald Commits
• dive4elements/framework at 533: new changeset   Wald Commits
  • [PATCH] Use the real artifact name   Wald Commits
• dive4elements/river at 8325: new changeset   Wald Commits
  • [PATCH] Reduce misspelled, superfluous logging   Wald Commits
• dive4elements/river at 8328: 3 new changesets   Wald Commits
  • [PATCH 1 of 3] Inject current km and pnp into the context used to calculate W in cm at gauge   Wald Commits
  • [PATCH 2 of 3] Use the sq relation artifact to load data from datacage   Wald Commits
  • [PATCH 3 of 3] merged   Wald Commits
• dive4elements/river at 8329: new changeset   Wald Commits
  • [PATCH] Added config for sq relation loaded via datacage   Wald Commits
• dive4elements/river at 8330: new changeset   Wald Commits
  • [PATCH] Avoid NPE if no dataset is activated in theme list   Wald Commits
• dive4elements/river at 8331: new changeset   Wald Commits
  • [PATCH] Main values: Reduce code duplication and correct logic to specify whether we are at gauge or not   Wald Commits
• dive4elements/river at 8332: new changeset   Wald Commits
  • [PATCH] bed_height_single.old_elevation_model_id is not NOT NULL   Wald Commits
• dive4elements/river at 8333: new changeset   Wald Commits
  • [PATCH] Let's be more generous with facet activity of main values   Wald Commits
• dive4elements/river at 8334: new changeset   Wald Commits
  • [PATCH] Q-main values as recommendations in SQ. TODO: solve DDZ   Wald Commits
• dive4elements/river at 8335: new changeset   Wald Commits
  • [PATCH] Throw non-lethal XPathException if not at gauge instead of lethal PSQLException if at gauge   Wald Commits
• dive4elements/river at 8336: new changeset   Wald Commits
  • [PATCH] The derivative curve is also a discharge diagram   Wald Commits
• dive4elements/river at 8337: new changeset   Wald Commits
  • [PATCH] Avoid NPE if river is not accessible   Wald Commits
• dive4elements/river at 8338: new changeset   Wald Commits
  • [PATCH] Scale second W-axis in cm according to first axis, which is expanded relative to the data, and set bounds for zooming purposes (plus a bit of cleanup in DiagramGenerator)   Wald Commits
• dive4elements/river at 8339: new changeset   Wald Commits
  • [PATCH] Look for gauge if no pnp is set in the context and return w in cm if at gauge   Wald Commits
• dive4elements/river at 8340: new changeset   Wald Commits
  • [PATCH] Create mainvalue facets before setting up the artifact   Wald Commits
• dive4elements/river at 8341: new changeset   Wald Commits
  • [PATCH] Introduce annotations, which know to which axis they belong   Wald Commits
• dive4elements/river at 8342: new changeset   Wald Commits
  • [PATCH] Allow W-mainvalues in SQ-relation   Wald Commits
• dive4elements/river at 8343: new changeset   Wald Commits
  • [PATCH] Remove duplication of AnnotationHelper-code in ChartGenerator   Wald Commits
• dive4elements/river at 8344: new changeset   Wald Commits
  • [PATCH] Use ws in m for duration curve   Wald Commits
• dive4elements/river at 8345: new changeset   Wald Commits
  • [PATCH] Auto-include zero in Q-domain axis   Wald Commits

Last message date: Tue Sep 30 15:18:40 CEST 2014
Archived on: Tue Sep 30 15:18:41 CEST 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...